How to tie a jade pendant with a rope?

The method of tying the jade rope is as follows: roast the rope with fire and knead it while it is hot, so that it can pass through the hole. Then pass both ends of the rope through the hole of the hook together. Leave an appropriate binding length, such as 1cm. Then open one end of the rope and tie a knot at the other end. Then tie a knot on the other side.

The tying rope of the jade pendant is divided into three steps: baking the rope, knotting it repeatedly, and handling the end. First, heat the two ends of the two ropes with fire, pinch the ropes together while they are hot, and then pass through the hole of the jade pendant to leave a suitable binding length.

Burn the ends of the two ropes on the rope with a torch, pinch the ropes together while they are hot, smooth them and let them pass through the hole of the jade pendant. Pass the burnt rope end through the hole of the jade pendant. Leave a suitable binding length according to personal preference.

Roast the rope with fire, pinch it while it is hot, and let it pass through the hole. The rope ends pass through the pendant hole together (a soft cloth can be placed under the pendant to prevent the pendant from being damaged). Leave an appropriate length for personal hobbies. Open one end of the rope and tie a knot at the other end. Then tie a knot on the other side.

Prepare a red rope, light one end of the rope with a lighter, and rub the rope end into a thin line to facilitate the passage through the small hole of jade. Pass the red rope through the small hole of the pendant, then align the two ends of the rope and straighten it so that the jade pendant is in the middle of the rope. Loop the rope at the back as shown in the figure and put it away.

One-sided knitting. The jade pendant can be tied with a single knot, the perforation on the rope of the jade pendant is loosened, the rope passes through the pendant from one direction, then the ropes on both sides cross through the small holes in the rope, leaving a hole, and then the step of pulling the left rope under the right rope is started according to the double knot method. Insert buckle.