Matters needing attention in installing indoor doors

If the bedroom door is improperly installed, it will affect daily use. What are the precautions for installing indoor doors? PChouse, let's have a look.

Handling solid wood door panels

When handling solid wood door panels, try to avoid scratching or colliding with door frames and doors. When placing door frames and doors, they should also be firmly placed on the indoor horizontal ground that is not exposed to direct sunlight but ventilated. Remember to tilt the door frame and door leaf, which will easily damage the door frame and door leaf.

Preparation before installation

Wooden door installation must be completed in the ground engineering of the hole (such as floor tiles and stone materials), and the putty on the wall must be scraped and polished before the wooden door installation step can be carried out (the hole where wall tiles and stone materials need to be pasted must be completely pasted on the side of the hole).

method of erection

Wooden door installation method must adopt the reserved hole installation method, and it is forbidden to adopt the practice of building the mouth while installing.

Check the wall humidity.

When installing the wooden door, check the humidity of the hole wall. If the humidity of the hole wall is less than 25%, the installation can continue normally. If the humidity of the installed hole wall is more than 25%, a moisture-proof isolation layer should be made on the installed wall.

Install in the corner or T-shaped wall.

If the wooden door is installed in the corner or T-shaped wall, a "fake wall" with a surface width of not less than 50 mm should be made on the side of the crib without the door before installation. Of course, the width of the fake wall here can be determined according to the width of the line, so as to avoid the asymmetry of the door boundary displayed on both sides.

Adjust the verticality of the door frame

When installing the door frame, it is necessary to adjust the verticality of the door frame to avoid damage to the door frame due to the drying and expansion of foaming agent during application.