Office doorplate materials and installation methods

Office doorplate is not only the important information of the office, but also a face of the office, so the size and material selection of office doorplate is very important. Today, let's take a look at Bian Xiao's office number materials and office number installation methods for your reference.

Aluminum alloy doorplate

The aluminum alloy doorplate is painted with silk screen printing, and the edge thickness is about cm, which looks the same and is easy to replace. A combination of panels or a combination of panels and slotted plates can be used.

Acrylic doorplate

Acrylic doorplates are made of screen printing or back engraving technology, generally made of 5 mm or 1 cm acrylic, which has a bright appearance.

Stainless steel doorplate

Stainless steel door panel Office door panel is made of corrosive paint, with a thickness of about mm, which is relatively thin and can be welded! Stainless steel plates are divided into brushed stainless steel and mirror stainless steel, which also look good.

Two-color board house number

Two-color plate doorplates are carved, with a thickness of10mm and various colors! Commonly used is brushed stainless steel color, which looks like stainless steel and has low cost.

Door size

The doors of enterprises are generally divided into glass doors and wooden doors, and the common sizes are generally about 80 cm to 90 cm! This requires that our house numbers should not be made too big or too small. If it is too big, it looks a bit stupid, but if it is small, it looks stingy! Therefore, the common specifications of general doorplates are: 925cm, 828cm,1030cm,1230cm and so on.

Door number installation method

1, Four Corners advertisement nail You should consider the doors and walls, and whether the property allows you to hit advertisement nail at the four corners. 2. Paste the house number. If the material is lighter and thinner than 2mm, it is recommended to use better double-sided adhesive tape. It's one of those thick double-sided tapes. If the material weighs more than 2mm, it is recommended to stick thick double-sided adhesive tape on both sides of the house number, and then point neutral glass at four corners.