Solution of knotting method of hanging rope

The knotting method of hanging rope is introduced as follows:

First of all, we should prepare materials, such as beads, pendants, scissors, lighters, pendant ropes and so on. When everything is ready, you can start the operation. Generally, pendant ropes sold in the market will have a knot. First, open this knot, then tie a single knot in the middle of the thick rope, then merge the thin rope and burn the thin thread quickly with a lighter. At the moment when the rope is cooked, rub it into a sharp thread with your thumb and forefinger, which makes it easier to thread the beads.

Second, after beading, drag the beads to the lower end, then pass the rope through the hole of the pendant, separate the combined rope, wind it twice, tie a knot in front and a knot in the back, and cut one end of the rope with scissors and cut it against the root.

The second method is as follows:

1, ordinary pendant rope is thick and difficult to string. At this time, we need to bake the rope with fire and pinch it while it is hot, so that it can pass through the hole. Be careful not to burn yourself.

2. The rope we use is usually double-stranded. We put the burnt double-stranded rope through the jade pendant.

3. After passing through the pendant, reserve the length, as shown in the figure, and leave the binding length of appropriate length according to personal preference, such as 1cm.

4. Open one end of the rope and tie a knot at the other end. Be careful to tie it on the back of the jade pendant, because tying the knot in front will affect the beauty of jade.

5. Go around and tie a knot on the other side.

6. Reverse the knot again.

7. Tie the knots one by one until the length of the rope ends remains.

8. Finally, twist off the end, then burn it with a lighter, take it out by heating or squeeze it with something else, so that the interface is easier to stick together.