Do you want to wet the wax sponge?

Hello, there is no need to get wet. Car cleaning. In order to ensure the waxing effect, the vehicle must be thoroughly cleaned before waxing. Wax. Waxing can be divided into manual waxing and mechanical waxing. Waxing by hand is simple and efficient. Whether hand waxing or mechanical waxing, it is necessary to ensure that the paint surface is evenly waxed. When waxing by hand, first, apply a proper amount of car wax on the sponge (special waxing sponge), and then apply it in a reciprocating straight line in a certain order. Each coating should overlap with the previous coating area 1/5- 1/4 to prevent missing coating and ensure uniform coating. When waxing mechanically, apply car wax to the sponge of the waxing machine. The specific painting process is the same as manual painting. It is worth noting that the coating at the edges, corners and edges should avoid exceeding the paint surface, and it is easier to grasp by hand in this respect. Polishing. According to the description of different car waxes, polishing can be carried out within 5- 10 minutes after use. When polishing, follow the principle of waxing first and then polishing to ensure that the polished automobile surface is not polluted. In the polishing operation, the non-woven fabric usually moves back and forth in a straight line and is pressed hard to remove the residual car wax. When you are self-reliant and skilled in waxing, you should pay attention to the following questions: 1. The waxing operation environment is clean and well ventilated, and a special waxing workshop can be set up if conditions permit. 2. The car should be waxed in the shade, otherwise the surface temperature of the car will be very high, and the adhesion ability of the car wax will decrease, thus affecting the waxing effect. 3. When waxing, the running route of manual sponge and waxing machine sponge should be straight reciprocating, which is not suitable for circular coating to prevent strong circular diffusion caused by uneven coating. 4. When waxing, we should follow the principle of "top down first", that is, first coat the roof, front and rear cover plates, body side, etc. 5. When waxing, if the same color as the car paint appears on the sponge, it may be that the paint surface has been damaged. Stop waxing immediately and repair it. 6. Polishing operation should be carried out within the specified time after waxing is completed, and the polishing movement is also linear and reciprocating. Unpolished vehicles are never allowed to drive on the road, otherwise they will be polished again, which will easily cause scratches on the paint surface. 7. After polishing, carefully check and remove the residual car wax on license plates, lights and doors to prevent corrosion. 8. After waxing, equipment and supplies should be properly cleaned and properly kept. 9. To master the frequency of waxing, due to the different driving and parking environments of the car, the interval of waxing cannot be gradual, but the paint surface of the car body can be wiped by hand. If there is no smoothness, it should be waxed again.