Manufacturing method of cloth bag

The manufacturing method of the cloth bag is as follows:

Materials: surface pocket cloth (thin body should be ironed with thin cloth lining), inner pocket cloth, 2 cm wide ribbon, cloth buttons, cotton belt (for button fastening).

1, the front of the surface pocket cloth is stitched on three sides.

2. If you want to have depth, you can grab an angle of 8 cm on each side. When sewing, you can cut off the upper corner about 1cm from the seam.

3. The front side of the inner bag cloth is stitched on three sides, and a gap of about 6cm- 10cm is left on one side.

4. The inner bag should be 8cm.

5. Turn the inner bag over and put it in the pocket of the watch. Align, because there are beautiful patterns inside and outside, so put the tape inside and sew it with the two bags. If you have a cotton band, don't forget to put it in and sew it along the edge after you put it away.

6. Turn the whole bag over from the gap in the inner bag. Then tidy up the gaps and sew them up with hidden seams. When finished, sew a clear line on the top. You can iron it before sewing. Finally, nail the button and it's over!

Introduction of the cloth bag:

Bag generally refers to all bag-like containers. Compared with other types of containers, bag-like containers are portable and foldable, and are widely used in various fields of social life.

Nylon cloth bag is a bag-like container made of nylon as the basic material. Due to the characteristics of nylon, nylon bags have the advantages of waterproof, lightweight and tough, and can be reused and washed. Nylon bag material is durable and has a wide range of practical properties. Common shopping bags, backpacks and thermal insulation bags all belong to nylon bags.