How to build catering stoves in rural areas

1, first of all, do a good job in design planning. You can find some cookware references online, or you can go to your neighbor's house to see more cookware made by carpenters, because the appearance of ceramic tile cookware is the same as that of cookware made of other materials, but the frame is different. Just find a good reference and do it.

2. After making a plan, first lay the foundation with cement bricks. The total height of the furnace can be set at will. The normal height is 80 cm and the width of the table top is 60 cm. It is suggested to lay 3 floors with cement bricks.

3. Calculate the number of vertical tiles (two vertical tiles are sandwiched between two sides back to back with structural adhesive to make the tiles form three overlapping edges) and the number of paving tiles. Because the total width of the countertop is at most 60, the width of the standing tiles should be reduced by the thickness of the side hanging of the artificial stone countertop (1.5cm) and the thickness of the cupboard door (1.5cm) and 2cm (the cupboard door and the edge of the countertop cannot be together). Then cut the specifications with a cutting machine according to the quantity.

4. Cover the cut ceramic tile with a layer of cement at the bottom of the paved cement brick, and then clamp a column with ceramic tile with structural adhesive back to back for curing.

5. Stick the vertical tile to the bottom tile with structural adhesive. Because only structural adhesive is used here, the curing time of this adhesive needs at least 12 hours, so we have to wait.

6. After the vertical tiles are fixed, lay a layer of tiles on them. After laying a layer, you can put another layer on it with cut broken tiles to increase the height of the countertop.

7. Customize countertops and counter doors. If you don't have the experience of these two things, it is recommended that merchants guarantee them.