Manufacturer of cylindrical wooden formwork

The manufacturers of cylindrical wood formwork include Linyi Taibo Building Materials Co., Ltd. and Linyi Pengcheng Wood Industry Co., Ltd. ..

Construction technology of cylindrical wooden formwork;

1. Two templates are buckled together, preferably staggered up and down;

2, every 300mm fixed a template special steel belt, steel belt screw don't buckle in the same vertical line; Position the fastened circular formwork to find the verticality. Will find a good verticality, left and right position of the cylindrical template for reinforcement, using pipe racks. The bottom is 30CM above the ground, and then a layer of frame pipe is added every other meter to fix it.

3. Set 10mm thick wood square at equal distance around the cylinder, and the wood square should be erected on the fastening line of two templates;

4. Every 1m, fix the wood square with four steel pipes, and the standard height of the circular formwork is 3m. Pay attention to misplaced installation after exceeding, and avoid reconnection.

5, the bottom of the cylinder is solidified with concrete, and when it is old, concrete is poured into the circular mold;

6, shuttering, chisel off the bottom cement first, and then remove the fixed steel pipe and wood square, remove the fixed steel belt.