What are the steps to renovate the old house and refresh the wall?

Before the wall is renovated, the old paint surface must be removed and then polished to remove all floating and sinking debris on the wall. If the wall is uneven, it should be repaired with putty first. If the wall is empty, the whole wall skin should also be removed and treated later.

2, finished product protection

After the foundation is completed, it is necessary to remove the furniture items in the construction area to avoid damaging the furniture during the decoration process.

3, putty treatment

Before scraping putty, check the flatness of the wall with a ruler. During construction, the uneven areas shall be scraped for many times to repair the uneven areas. Generally, putty can be scraped twice and polished after each scraping to make the wall smoother.

4. Paint

After the putty is dry, paint the wall. Primer should be applied first, and the construction strength should be uniform, so that the film thickness is relatively consistent. Then start topcoat construction, and the paint surface must be naturally dried.

5. Open the window for ventilation

There will be some pungent and harmful gases after the wall decoration, so after the construction is completed, it is necessary to open the window in time to ventilate the indoor air and accelerate the drying of the wall.

6. Polishing and cleaning

Polishing and cleaning is to polish the unsmooth part of the wall with sandpaper after the wall is dry. If paint drips on the wall, you can wipe it with a rag and remove the decorative film.