Internal structure of rural firewood stoves

The internal structure of rural firewood stoves is as follows:

For the kitchen surface, you can choose high-quality full tiles, and it is recommended that 80×80, which is the size of a pot. Cut a circle as big as a pot on the tile with a cutting machine.

The stove body is a small red brick structure, and the side of the stove hall is 12 brick. The bottom of the pot should be kept at a height of 50 cm from the furnace teeth. The burning hall is a pot-shaped cone, and the oven door is located in the center of the bottom of the pot, with a height of about 6 cm.

The fire door of the stove needs a small countertop to prevent firewood from falling. On the right side of the front, there is a small square hole for placing the igniter. There is an ash hopper with barrel-shaped autocratic furnace teeth below the furnace teeth, and there is an air inlet pipe for placing the blower. There is an eye at the bottom, which needs to be blocked by an iron ball in the bucket. The iron ball can move inside, just blocking the ash discharge eye. At the bottom, there are two symmetrical support legs, and the ash unloader is just a support. There is a small red brick in front that is blocked tightly, and this small red brick can still move. The whole shape is symmetrical, and the leg height is about 80 cm. Porcelain is pasted on the front, and the oven door is 6 cm high. There is a 6 cm line in front of the stove and stove. The legs are tile-shaped and narrower than the kitchen surface.