How to put the automatic reply meter back when it is scattered?

1. After the tape measure is drawn out, the steps of reinstalling it are as follows: fix one end of the spring leaf on the shaft, and connect the other end with the tape measure core, and fix the tape measure housing on the shaft.

2. First, wrap the wires in the order shown in the figure, and then plug them in. The external head should be embedded around the white part. After the wire is inserted, turn to the back and put the lead into the slot. From left to right, the centimeter part is outward, and the Arabic numerals are reversed.

3, long-term use of spring fatigue, elasticity becomes smaller, resulting in a period of time can not go back.

If it is scattered, it needs to be rolled up again and stuffed into a plastic frame. Install the small spring. Put the small spring in the hollow column. Stick a plastic frame with a small button on the ruler box to prevent the pulled tape from retracting. When installing, buckle it on the small spring, cover it and the tape measure will be installed.