Table of common door and window sizes

When decorating a house, be sure to know the size of doors and windows, because to change the size of doors and windows, what is the common table of door and window sizes?

Commonly used doors and windows are generally 900mm×2200mm in size, and indoor guards are 800mm×2200mm in size.

1, the width of the door of the house is generally between 80 and 90 cm, and the standard size of the house is usually 2 10 times 90 cm.

2. In general, the height of the window is 1.5m, and the height of the windowsill is 0.9m The top of the window is about 2.4m above the ground.

3. Generally, the window width starts from 0.6 m. According to the regulations of building standard hole specifications, the general building hole width modulus is 300mm, that is, the general width is 600mm, 900mm, 1200mm, 1500mm, etc.

4. The bathroom window is about 1m from the ground, and its height is1.25m-1.4m. Sometimes the distance between the window and the ground will increase a little, and the height of the window will decrease. The width of the window is generally between 0.81m-1.2m. ..

What aspects should I pay attention to when choosing doors and windows?

1, considering the windproof performance. The windproof performance of doors and windows is very important, which can protect our house from damage in bad weather such as storms and strong winds. When choosing doors and windows, try to choose hard glass and door frames.

2. Consider the sound insulation performance. Sound-proof doors and windows can protect our privacy to the maximum extent and avoid noise disturbing our neighbors, so the sound-proof performance is more important in the selection of doors and windows.

3. Consider water tightness. Watertight doors and windows can effectively prevent rainwater from infiltrating into the house in rainy season, so we must pay special attention to the watertightness of doors and windows in rainy southern areas.

4, to consider the thermal insulation performance. Generally speaking, thick glass has better thermal insulation effect than thin glass, and double-layer glass generally has better thermal insulation effect than single-layer glass, so when choosing doors and windows, you can choose thick glass with better sealing performance, which can play a good thermal insulation role in winter.

5. Corrosion resistance. Non-corrosion-resistant doors and windows, after the baptism of rain, are likely to rust, greatly affecting the appearance. Therefore, in the choice of doors and windows, corrosion resistance is also an important factor for everyone to consider.