When decorating a new house, which season is the most suitable for laying tiles?

When decorating a new house, which season is the most suitable for laying tiles? 1. It is best to stick bricks in March-May, and try to avoid summer and winter, because there is more rain in summer, the air humidity is higher, and the moisture content of wood often exceeds the standard, which will affect the decoration quality; If the temperature is too low in winter, it will freeze the decoration materials such as paint and cement mortar. And reduce the initial supporting force, thus affecting the quality of decoration. Therefore, it is best to avoid summer and winter, and it is best to stick tiles in spring or early autumn. For many decorators, there must be a bloody lesson, that is, choosing a good decorator can save a lot of things, because most people will find some temporary workers on the roadside when choosing a decorator, and once they finish their work, it is basically difficult to find them again. So once there is any quality problem, you need to solve it yourself, which is very troublesome. You must find some reliable maintenance workers.

2. It is not suitable for laying tiles in summer. Due to the high temperature in summer, the work efficiency of workers is obviously reduced, especially above 30℃. And the work effect is not particularly good. Another point is that the high temperature in summer and the rapid evaporation of water will lead to the rapid evaporation of water in the bonding material, which will lead to the decline of its strength. Therefore, in summer, the requirements for ceramic tile paste materials are relatively high. The quality of ceramic tile mainly depends on the quality of porcelain. Generally, the better the tile, the thinner the porcelain surface will be. Because the porcelain surface is very thin, it is not easy to get dirty. Good density and orderly molecular arrangement.

It's too tight for dirty things to get in. Affected by the weather, it will become smaller accordingly. The option available is to see if there is a tile surface. Patches, holes, bubbles, cracks, scratches, bumps, glazed tiles should also pay attention to the defects of leakage, throwing and grinding. Tiles should be laid in winter to prevent them from falling off. Before paving, it needs to be soaked in water to keep the water in the tile saturated. After paving, the moisture in the mortar will not be absorbed by drying, which leads to the mortar drying too fast and can not play a bonding role. Decoration will use a lot of wood, wood itself has a certain moisture content and expansion coefficient.

If you don't pay attention to the decoration in winter, the wood used will actually be deformed. If you don't pay attention to the treatment, it will easily shrink or expand in future use, resulting in more serious deformation. Therefore, it can only be used after returning to normal state. When it is windy and dry in winter, the cement will dry faster when decorating tiles, effectively increasing the adsorption of particles in the air. However, the low temperature in winter is not conducive to construction, which will delay a lot of construction period, and tile laying in winter is prone to loose pasting.