Dismantling method of kitchen floor drain

Kitchen floor drain is the key to household kitchen hygiene, but if it is not cleaned and maintained in time, it will be easily blocked and bring trouble to daily life. Faced with the old floor drain that is difficult to clean, many people will choose to remove it and replace it with a new one. So, what should I do to remove the kitchen floor drain?

First, we need to prepare some tools, including wrenches, screwdrivers, cement knives and heavy hammers. After the tools are ready, the pretreatment of the demolition area is started. Turn off the water, electricity and gas in the kitchen, and remove all furniture, equipment and other items nearby to prevent collision, damage and dust intrusion.

Then, we need to remove the cover or drain on the floor drain first and turn it slowly with a wrench until it is opened. After removing the cover, we need to check whether there is water under the floor drain first. If there is water, we need to drain it first. In the absence of stagnant water, we need to use old towels and other items to seal or block the floor drain outlet.

Then, we need to clean the cement and other sundries under the floor drain with a cement knife or other similar tools, and break the cement bricks or remove them with a hammer.

Finally, a new floor drain can be installed to complete the demolition. However, it is necessary to pay attention to safety in the process of demolition to avoid damaging water pipes or wires and preventing dust from flying. At the same time, the demolished ground needs to be resurfaced to maintain the overall level.

Generally speaking, the removal of kitchen floor drain requires preparatory work, slowly cleaning the cover and cement bricks, and then installing a new floor drain. In the process of demolition, attention should be paid to safety to ensure the overall smoothness.