How to set password and fingerprint for fingerprint lock?

Password modification of smart lock is generally divided into five steps:

First, enter the smart lock management mode.

Each smart lock has an administrative password when it is first purchased. First, enter the smart lock management mode.

Second, enter the password management function.

After entering the password management mode, press the * key and the smart lock will ring once, which means that the password management function has been turned on.

Third, enter the old password.

After turning on the password management function, enter the previously set user number in the input panel, then enter it, confirm it, and release your finger after hearing a long beep. At this point, you will enter the link of intelligent voice to remind you to change your new password. (Pupils, face and fingerprints can also be used instead. )

Fourth, enter a new password.

At the prompt of intelligent voice, enter the new password number you want to modify (the general password is 6 digits), and then confirm.

Five, exit the password management mode

If the user does not operate other modes after the change, please press the * key again or wait 15 seconds to automatically exit the password management mode.

Add user fingerprint:

Press the # key, enter the management password and confirm.

Press the No.2 key to enter the user's addition, and then press the No.3 key to enter the user's fingerprint. The system will automatically number and broadcast the language. Press your finger on the fingerprint reader, and when you hear the voice prompt "Please take out your finger and put it back", take it out and put it back on the fingerprint reader. After successfully adding the language prompt, press the * key to return to the superior menu until you exit the management mode.