How to check and accept the house when closing the house 20 18 Matters needing attention when closing the house

Recently, many owners have reported that various problems will always be found in the renovation of new houses, which has affected the renovation progress. This is actually caused by the owner's failure to seriously accept the house when he closed the house, so it is very important to close the house. So how do you accept the house when you close it? Next, Bian Xiao will introduce you to the matters needing attention in the acceptance of new houses. Let's have a look.

First of all, the ground

Acceptance of the ground, first of all, look at the flatness of the ground to see if there are obvious potholes, and then look at whether there are cracks and sand prevention. If there are problems in cement quality and mortar ratio during construction, there will be anti-sand phenomenon. If you can rub the ground and sand with your feet, there will be a problem of sand prevention.

Second, the wall

Check the wall for cracks and hollows. If there is, you can make a mark and fill it with putty when decorating. You can also check whether the putty on the wall is waterproof. The method is to splash a bottle of water on the wall and touch it with your hands to see if it will touch the mud. If not, the putty on the wall is waterproof.

Third, the roof.

Acceptance of the roof, mainly to see whether there is cracking phenomenon, and then check whether the corner line of Yin and Yang between the roof and the wall is horizontal. If it's not horizontal, then it's necessary to use plastering gypsum to find the low level when decorating, and then use water-resistant putty to level it.

Fourth, the circuit.

Check whether the position and layout of the socket switch are reasonable, and at the same time, you can see whether the circuit needs to be modified during decoration. At the same time, check the functions of all switch sockets and see if they can be used normally. You can also try using a charger to see if each socket can be electrified.

Verb (short for verb) doors and windows

The key point of door and window acceptance is to see the strength and firmness of the material, whether the push-pull is smooth, whether the door and window switch is easy to use and whether the seal is tight. Pay special attention to check whether there are scratches on doors and windows that are difficult to repair and whether there is broken glass during acceptance.

Six, pipeline

Acceptance pipelines mainly refer to gas pipelines and drainage and sewage pipelines. The gas pipeline needs to be tested by people from the gas company. The inspection of drainage and sewage pipes is very simple. Pour more water near the pipes in the kitchen, bathroom and balcony to see if the water flow is smooth. Try to install an odor-resistant floor drain at the nozzle, which can improve the air index in the kitchen and bathroom.

The above is about how to accept the house when closing the house. I hope it will help everyone!