I decorate my new house myself. Please ask someone who knows how to do it to provide me with detailed steps, such as painting the wall first, laying the floor tiles first, pressing the door first, whe

I decorate my new house myself. Please ask someone who knows how to do it to provide me with detailed steps, such as painting the wall first, laying the floor tiles first, pressing the door first, when to suspend the ceiling, and so on. 1: Demolition of demolished projects.

Masons should build a good wall before entering the site.

3 hydropower master enters the site, slotting, laying pipes and paying off (preliminary work of hydropower)

4 Masons make waterproof/tiles.

5 carpentry comes into play until the early stage of carpentry work is completed.

6 painter comes into play until the preliminary work of carpentry is completed.

7 hydropower sanitary ware installation

8-story installation

The painter finished the repair.

10 room cleaning (completed)

Decorative sequence

(1) Tools are in place and ready. A few things that must be prepared before decoration must be put in your bag. Tape measure (buy 5m, not 3m), calculator, big board clamp (for bills and receipts); In addition, it is best to prepare old towels (soft cotton, which are used to wipe bricks after pasting) and plastic bags (wrapped around the pipeline joints to prevent dirt from blocking) at the construction site in advance.

(2) Choose an auspicious day. Before workers enter the site, it is best to personally measure every corner of the house, write it down with a pen ruler and mark it clearly. Don't be lazy. The main contents of the measurement are: 1, and the area involved in the decoration process is clear. Especially tile area, wall paint area, wallpaper area and floor area; 2, clear the bearing wall size. Especially it is necessary to design the wall size of furniture in the future.

(3) Demolition and transformation of the main body make the space more practical. The demolition and reconstruction of the main body is the first project, which mainly includes wall demolition, wall building, wall skin, heating, plastic steel windows and so on. Remove the garbage in time to ensure the cleanliness of the room, but also for the convenience of construction. [At this time, it is best to browse the cabinets, range hoods, cookers and water heaters and make sure.

(4) hydropower transformation, arrange the use of each space in hydropower transformation, and have no regrets. Bricks are stuck on the wall and the ceiling is sealed, so it is difficult to add another socket. So be sure to locate the switches, lights, basins, bathtubs, washing machines and so on. Before the hydropower transformation, the cabinet designer should take measurements at home to help you determine the transformation scheme of power supply and waterway. Water heater, it is also best to send someone to design the position of power supply and interface according to the model you determine. Remind you: it is best to leave a power socket on the wall under the basin, which is convenient for loading kitchen treasures. Air conditioning holes and power supply should be placed on the wall of the bedside as far as possible to avoid air conditioning blowing directly at people in the future. Keep a distance of 20 cm between the strong and weak points, such as a distance of 20 cm between the socket and the network cable.

(5) Wrap the riser and the ugly pipeline. Considering the humid environment of kitchen and bathroom, the material of riser must not use wooden keel! Everyone must be careful, even if the wooden keel is painted with antirust paint. Remember, the vertical pipe is made of light steel keel or red brick. Light steel keel saves space, but the most sturdy and easy to use is red brick. At this time, you need to buy tiles, jointing agents and so on. Furniture should be set in advance, and the construction period should be kept well, generally at least 15 days. At this time, it's time to set the finished door, because the finished door is usually made by the factory, and it takes 15-30 days to arrive.

Buy a floor drain before sticking bricks. Note: The floor drain should be bought in oriental home, but Yao Shun doesn't use it much. Buy a special washing machine or floor drain for the shower, and deodorize it. After waterproof napping, we are ready to stick bricks. In addition to the normal precautions for sticking tiles, the tiles are soaked in water and dried in the shade; In addition to cutting broken tiles, I personally emphasize the overall beauty of tiling. Simply put, the width of the brick on the wall should not be less than 10 cm. This often happens when sticking bricks. For example, the wall width is 1 m, the brick is 32*32cm, and the normal pasting method is 3 whole 1. But 32× 3 = 96, the jointing space of 1 cm should be reserved. Finally, the remaining small bricks can only be pasted 3cm wide. I'm not picky. A narrow brick is stuck there, which is ugly. As long as you make it clear to the bricklayer in advance, the width of the brick on the wall should not be less than 10 cm. He can cut bricks on both sides. Let's take a wall just 1 meter wide as an example, and it becomes 2 whole and 2 small. 32× 2 = 64, reserved 1 cm for jointing, and the small bricks on both sides are 17.5cm, so that it looks not only symmetrical on both sides, but also the whole wall will not be narrow there. However, this practice costs bricks, so please make a profit before buying bricks. At this time, the basin and faucet should be determined, and the cabinet designer should be invited to the door for the second time. At the same time, buy paint (ready mixed paint or varnish), wall paint, nitrolacquer, diluted water, etc. And if you paste wallpaper, you have to decide first.

(6) Oil workers go into battle and wash and brush. If you don't buy a finished door, let the worker master do it. Note: Any carpentry work, even if it is just a pass, must follow this step, the big core board sinks to the bottom, and the veneer is painted again. When mixing oil, it is absolutely wrong to let those lazy and irresponsible workers brush oil directly on the big core board. Don't believe the story of selling big core boards. It is no problem to brush oil directly on them. Remember, brush the oil directly, and it won't take long for it to crack completely, remember to remember. Now you don't have to brush mixed oil, but use spray. Workers had better spray white on the inside of the door and the meter box, which is beautiful and not wasteful. There's nothing to say about painting the wall. Leveling, grinding and rolling must depend on the skill of your oiler. My house is painted in white except wallpaper, and I haven't painted it. Need to remind everyone that if you want to paint the wall, you must pay attention to color matching. The adjusted color is lighter than the color card, and it must not be the same as or darker than the color card, otherwise you will regret it. Because when you paint the wall at least twice, some even three times, the color of the upper wall will get darker and darker. Different people have different views on whether to spray or roll coating.

(7) wallpaper, beautiful wall wallpaper is much better than painting the wall. After the wall paint is painted, the oil trade union paints nitrocellulose paint where wallpaper needs to be pasted. The paint can be dried thoroughly the next day, and then the master is invited to paste the wallpaper. At first, I was worried that pasting wallpaper would stain the painted white wall, but later I realized that pasting wallpaper was really a clean job! My worry is completely unnecessary. Note: Do not open the window for ventilation within 48 hours after the wallpaper is pasted, and let it dry slowly in the shade. Tell the master that if something gets stuck, ask him to help repair it. At this time, it is time to buy panels, sockets and lamps.

(8) Installing the socket panel The socket panel can be installed in about half a day. Remind you: 1, it's best to buy a socket with switch function, especially in the kitchen, so that both rice cookers and microwave ovens can be controlled without plugging in the power supply. 2. Although the socket with switch is good, we should pay attention to practicality. According to my observation, all three sockets of the five-hole power supply with switch are flat. Once your electrical appliance needs three round sockets, there will be the depression of using plug-in boards when the sockets are empty. Therefore, multi-purpose sockets must be used, even if it has no switch control! [At this time, you should buy the ceiling for bathroom and kitchen] [If you need to install Yuba at this time, please buy and install it before the ceiling]

(9) Kitchen and bathroom ceiling, seal the last ugly part, install water heater and Yuba first. After installation, the ceiling edge can better semi-package the water heater, that is, the connection is more beautiful. Note: 1, it is best to buy aluminum button ceiling, even if it is demolished after many years, it is worth a lot of money to sell waste aluminum. On the other hand, pvc gusset plates look good, but the quality and performance are average, and plastic things are worthless even if they are sold as waste. 2. Buy gusset plates, and ask the price of the whole package. Don't buy gusset plates and corners separately. But the installation fee is extra.

(10) Cabinet installation, the birth of Midea's overall kitchen cabinet is a coordinated project, and the range hood, cooker and sink should be arranged in advance. It is best to deliver the goods on the same day and install them together with the cabinet. Tell the cabinet factory in advance to bring the artificial stone countertops cut off from the cooker and sink, and you can't give the factory anything with more money for nothing. It is very useful to install a water meter and water pipe.

(1 1) Install the finished door. The finished door should be installed before the floor, mainly because the door installation steps are complicated, such as hinge, door lock, door suction, door frame and so on. , and use a lot of tools. If the floor is installed first, it is difficult to avoid bumping. If you install the floor first and then the door, there are many small holes in the floor, so you should install the door first!

(12) It is suggested to install clothes hangers, curtain rods, lamps, sanitary ware and bathroom hardware, and fix these items with loose ash one by one before installing the floor.

(13) Before installing the floor, it must be leveled. Many floors in the neighbor's house are useless for leveling, so Lao Mao and I are careless. Unexpectedly, after the floor was paved, the corridor was very flat and depressed. I had to take it off, pat it flat with instant powder and spread it again. Prepare a little pepper in advance, don't buy the so-called insecticidal powder brought by the floor workers, just let them spread it along the kicking angle. Workers must not cut the floor in the house, cut in the corridor and finally clean the corridor.

(14) The biggest embodiment of cleaning in agricultural reclamation is cleaning the glass. It is a terrible thing to climb out and clean such a tall building. After cleaning, you'd better do it yourself. Reminder: The following items should be prepared before the furniture enters the market: disposable shoe covers (don't buy poor quality shoes, they will break when you step on them), several boxes of activated carbon, ladders and floor protective film (it is best to bring a wardrobe and a TV cabinet to protect the floor). If you buy a cloth bed, remind you to see if all the cloth can be taken off. The next day, when I wanted to take off the original cloth and customize a set of pure cotton, I found that the cloth cover was too long and was nailed into the bed box. Workers are lazy, thinking that they will not open condoms for a year or so. Send home appliances quickly, and wait until money is tight or not in a hurry. Anyway, electrical appliances are more and more advanced and cheaper.

(15) Accessories are decorated, and the home has a taste. With decorative paintings and beautiful curtains, the gentle taste of home comes out.

This is the most basic, hehe, of course, making floor tiles first! QQ32068389

We can tell you in detail when we do this.