Renovation steps of duplex rough houses Can ordinary houses be renovated into duplex houses?

The following is divided into "purchase order" and "decoration order" to help you clear your mind.

In fact, "what to buy first, then what to buy" and "what to pack first, then what to pack" are completely different concepts. Many products are customized, so it is necessary to reserve the product cycle (such as finished doors, cabinets, etc.). ). And many goods, even if they are not customized, must be determined in size or use mode before the decoration process can serve them more appropriately (such as water heaters, range hoods, cookers, etc.). ). Therefore, it is necessary to clarify not only the decoration order, but also the purchase order.

Purchase order:

1, tools (tape measure, calculator, clip)

2, radiator (change the location and pipeline in advance, finish the wall, you can ask the manufacturer to install)

3, finished door (long production cycle, set in advance, the foreman is present when measuring, good communication with each other)

4. Cabinets (there are 2 home visits, and the work of changing water to electricity depends on how the cabinets are designed)

5. Range hoods, cookers, disinfection cabinets, dishwashers, etc. (depending on the model, you can buy it first and then put it in the cabinet)

6, water heater (kitchen treasures should be bought together with the water heater, which has a discount and saves trouble)

7, tiles (to fully consider the loss of tiles! I'd rather have more, but I can return them in the end.

8. Furniture (the production cycle is also long, so it should be decided in advance. When you buy the finished product, you should bring the size map of the apartment. If it is customized, please wait until the space is fully planned before measuring)

9, sanitary ware, faucet (at least to ensure that the cabinet quantity twice, set the specific size of the dish basin. Please make sure that the sink is in place before installing the cabinet)

10, paint, wall paint, nitrocellulose paint, etc. After mixing oil and cleaning oil, it is to paint the wall or paste wallpaper.

1 1, panel, socket (make sure that the socket is in place before the cabinet is installed to facilitate the use of electricity)

12, lamps (it is best to buy lamps at one time, and the quality of energy-saving bulbs must be better, and Philips is the best)

13, aluminum gusset plate (the ceiling of kitchen and bathroom requires js all-inclusive, so as to prevent the gusset plate and the corner from counting money)

14, clothes hangers, window rails, bathroom hardware (it is best to install them uniformly before cleaning. Lamps and lanterns, sanitary ware and hardware, clothes hangers, window rails, etc. )

15, floor (if the quantity is overstated, multiple choices can be made, but if it is overcharged, it will be returned).

16, curtains, bedding (after cleaning, furniture comes into play, and pl's home can be decorated with fabric)

Decoration order:

1, main body reconstruction and demolition

2. Hydropower transformation

3, package pipe

4. Gaiwa

5. Woodworking (pass, etc. )

Step 6 brush oil

7. Paint or wallpaper the walls.

8. Install the socket panel

9, kitchen and bathroom ceiling

10, cupboard

1 1. Install the finished door.

12. Install lamps, sanitary ware and bathroom hardware.

13, install hangers and window bars.

14, floor

15, radiator

16, Land Reclamation and Clearing

17, furniture, household appliances

18, curtains, bedclothes

What are the decoration steps of blank houses?

First, the tools are in place and ready.

Before decorating, you must prepare a few things and put them in your bag. Tape measure (buy 5m, not 3m), calculator, big board clamp (for bills and receipts); In addition, it is best to prepare old towels (soft cotton, which are used to wipe bricks after pasting) and plastic bags (wrapped around the pipeline joints to prevent dirt from blocking) at the construction site in advance.

Second, choose a good day and shoot.

Before the workers enter the site, it is best to personally measure all corners of the house, write it down with a pen ruler and mark it clearly. Don't be lazy. The contents of the measurement mainly include:

1, specify the size of the main wall. Especially in the future, we should design the wall size of furniture;

2. Define the areas involved in the renovation process. Especially tile area, wall paint area, wallpaper area and floor area.

Third, the main body is demolished to make the space more practical.

The main body demolition and reconstruction is the first project, which mainly includes wall demolition, wall building, wall covering, heating demolition, plastic steel window replacement and so on. Remove the garbage in time to ensure the cleanliness of the room, but also for the convenience of construction.

Four, hydropower transformation, arrange the use of each space.

Hydropower transformation, no regret medicine to eat. Bricks are stuck on the wall and the ceiling is sealed, so it is difficult to add another socket. So be sure to locate the switches, lights, basins, bathtubs, washing machines and so on.

Before the hydropower transformation, the cabinet designer should take measurements at home to help you determine the transformation scheme of power supply and waterway.

Water heater, it is also best to send someone to design the position of power supply and interface according to the model you determine.

Reminder: It is best to leave a power socket on the wall below the basin, so as to facilitate the installation of kitchen treasures.

Air conditioning holes and power supply should be placed on the wall of the bedside as far as possible to avoid air conditioning blowing directly at people in the future.

Keep a distance of 20 cm between the strong and weak points, such as a distance of 20 cm between the socket and the network cable.

5. Stand up the pipe and wrap the ugly pipe.

Considering the humid environment of kitchen and bathroom, wooden keel must not be used as the material of riser! Everyone must be careful, even if the wooden keel is painted with antirust paint.

Remember, the vertical pipe is made of light steel keel or red brick. Light steel keel saves space, but the most sturdy and easy to use is red brick.

Sixth, ceramic tiles must first have a solid texture.

Buy a floor drain before sticking bricks.

Note: buy a special washing machine or shower floor drain to deodorize.

After waterproof napping, we are ready to stick bricks.

In addition to the normal precautions for sticking tiles, the tiles are soaked in water and dried in the shade; In addition to cutting broken tiles, I personally emphasize the overall beauty of tiling. Simply put, the width of the brick on the wall should not be less than 10 cm. This often happens when sticking bricks. For example, the wall width is 1 m, the brick is 32*32cm, and the normal pasting method is 3 whole 1. But 32×3=96, the jointing space of 1 cm should be reserved. Finally, the remaining small bricks can only be pasted 3cm wide. I'm not picky. A narrow brick is stuck there, which is ugly.

As long as you make it clear to the bricklayer in advance, the width of the brick on the wall should not be less than 10 cm. He can cut bricks on both sides. Let's take a wall just 1 meter wide as an example, and it becomes 2 whole and 2 small. 32×2=64, reserved 1 cm for jointing, and the small bricks on both sides are 17.5cm, so that it looks not only symmetrical on both sides, but also the whole wall will not be narrow there.

However, this practice costs bricks, so please make a profit before buying bricks.

Seven, oil workers, washing and brushing.

If you don't buy a finished door, let the worker master do it.

Note: Any carpentry work, even if it is just a pass, must follow this step, the big core board sinks to the bottom, and the veneer is painted again. When mixing oil, irresponsible workers are lazy and brush oil directly on the big core board, which is absolutely wrong. Don't believe the story of selling big core boards. It is no problem to brush oil directly on them. Remember, brush the oil directly, and it won't take long for it to crack completely, remember to remember.

Now you don't have to brush mixed oil, but use spray. Workers had better spray white on the inside of the door and the meter box, which is beautiful and not wasteful.

There's nothing to say about painting the wall. Leveling, grinding and rolling must depend on the skill of your oiler.

My house is painted in white except wallpaper, and I haven't painted it. Need to remind everyone that if you want to paint the wall, you must pay attention to color matching. The adjusted color is lighter than the color card, and it must not be the same as or darker than the color card, otherwise you will regret it. Because when you paint the wall at least twice, some even three times, the color of the upper wall will get darker and darker.

Different people have different views on whether to spray or roll coating. It is said that the spraying effect is better, but once it is damaged, it becomes extremely difficult to touch up the paint.

Eight, wallpaper, beautiful walls

Wallpaper is much better than wall painting.

After the wall paint is painted, the oil trade union paints nitrocellulose paint where wallpaper needs to be pasted. The paint can be dried thoroughly the next day, and then the master is invited to paste the wallpaper. At first, I was worried that pasting wallpaper would stain the painted white wall, but later I realized that pasting wallpaper was really a clean job! My worry is completely unnecessary.

Note: Do not open the window for ventilation within 48 hours after the wallpaper is pasted, and let it dry slowly in the shade.

Tell the master that if something gets stuck, you should ask him to help repair it.

Nine, install the socket panel

The socket panel can be installed in about half a day.

Reminder:

1, although the socket with switch is good, we should pay attention to practicality. According to my observation, all three sockets of the five-hole power supply with switch are flat. Once your electrical appliance needs three round sockets, there will be the depression of using plug-in boards when the sockets are empty. Therefore, multi-purpose sockets must be used, even if it has no switch control!

It's best to buy a socket with switch function, especially in the kitchen, so that the rice cooker and microwave oven can be controlled without plugging and unplugging the power supply.

Ten, the kitchen ceiling, sealed the last ugly part.

Install the water heater and Yuba first. After installation, the ceiling edge can better semi-package the water heater, that is, the connection is more beautiful.

note:

1, it is best to buy aluminum button ceiling, even if it is demolished after many years, it is worth a lot of money to sell waste aluminum. On the other hand, pvc gusset plates look good, but the quality and performance are average, and plastic things are worthless even if they are sold as waste.

2. Buy gusset plates, and ask the price of the whole package. Don't buy gusset plates and corners separately. But the installation fee is extra.

Eleven, the installation of cabinets, a beautiful overall kitchen was born.

The cabinet is a supporting project, and the range hood, cooker and sink should be arranged in advance. It is best to deliver the goods on the same day and install them together with the cabinet.

It was agreed with the cabinet factory in advance that the artificial stone countertops cut off from the stoves and sinks should be brought here, and things with more money should not be given to the factory for nothing. It is very useful to install a water meter and water pipe.

Twelve. Installation of finished door

The finished door should be installed before the floor, mainly because the installation steps of the door are complicated, such as hinge, door lock, door suction, door frame and so on. , and use a lot of tools. If the floor is installed first, it is difficult to avoid bumping. In my house, the floor is installed first and then the door is installed. There are many small holes in the floor, and the meat hurts.

Thirteen. Install clothes racks, curtain rods, lamps, sanitary wares and bathroom hardware.

It is suggested that these projects with scattered ash should be settled one by one before installing the floor.

Fourteen Install the floor

The floor must be leveled before installation. Many floors in the neighbor's house are useless for leveling, so Lao Mao and I are careless. Unexpectedly, after the floor was paved, the corridor was very flat and depressed. I had to take it down, flatten it with quick powder and repave it.

Prepare a little pepper in advance, don't buy the so-called insecticidal powder brought by the floor workers, just let them spread it along the kicking angle.

Workers must not cut the floor in the house, cut in the corridor and finally clean the corridor.

Fifteen, install the radiator

At the end of the decoration, it is the easiest to neglect.

Be sure to make it clear to js in advance that if the seal on the installation sheet is not the manufacturer's seal, it will not be signed.

Pay attention to the installation list (not the purchase list) of radiator. Who is the stamped part? Many js operate in this way, and the purchase order is stamped with the manufacturer's seal; The single cover is the seal of the installation team. In this way, the so-called "warranty year" is only the radiator itself, but the material is either steel or copper and aluminum, so as long as it can leave the factory, there is almost no quality problem. The most error-prone place is installation! If you agree to seal the installation team, it basically means that you give up the right to pursue the responsibility of the manufacturer. Once the floor is soaked and the home is flooded, the manufacturer absolutely shirks the responsibility and the installation team can't find anyone. The so-called warranty can only be borne by the user himself.

Sixteen, land reclamation and cleaning

The biggest embodiment of cleanliness, I think, is to clean the glass. It is a terrible thing to climb out and clean such a tall building. Secondly, floor waxing, you have to buy your own wax, which is cheap and easy to use, but you must use a clean waxing machine, which is dozens of times faster than manual waxing.

As for the rest, I don't think we need to rely too much on cleanliness. They just scrape around with small blades, which is not smart.

So after cleaning, you'd better do a detailed cleaning yourself. Go to the supermarket to buy a bag of "Wu Jie powder" and some old towels. Wipe old towels with dry five-clean powder, from door to door, from tiles to kicking corners, from one house to another. Don't be lazy. The result will surely make you proud.

17, furniture, home appliances comes into play.

A brand-new home, furniture bears the brunt. Bed, mattress, wardrobe, shoe cabinet, sofa, dining table, etc.

Reminder: Before furniture enters the market, you should prepare the following items: disposable shoe covers (don't buy poor quality shoes, they will break when you step on them), several boxes of activated carbon, ladders and floor protective film (it is best to protect the floor by carrying wardrobes and TV cabinets).

Eighteen, accessories decoration, home has a taste.

With decorative paintings and beautiful curtains, the gentle taste of home comes out.

Reminder: Don't spend too much money on dressing curtains. Curtain heads and lead pendants are necessary, but eight ten-dollar lace, cloth buttons and ears cost twenty or thirty dollars more per meter, which is unnecessary and ugly.