Steps and procedures of decorating your own house

Steps and procedures of decorating your own house

Steps and processes of decorating your own house. Generally, when a house is just bought back, it only belongs to a rough house. You need to find a decoration company to decorate in order to become habitable. Let's share the relevant contents of the steps and processes of decorating our house. Come and have a look with me.

Steps and procedures of decorating the house by yourself 1

1, tools in place

These things need to be prepared before decoration. Tape measure (buy 5m), calculator, big board clip (for bills and receipts). In addition, prepare old towels (soft cotton ones, used to wipe bricks) and plastic bags in advance (to prevent dirt from blocking).

2. Choose a good day.

Before the workers enter the site, measure every corner of the house and write it down with a pen ruler. Never be lazy. Clear the areas involved in the decoration process, namely: tile area, wall paint area, wallpaper area and floor area; Determine the main wall size, especially the wall where furniture needs to be placed.

3. The main body is demolished and changed

The main body demolition and renovation is the first project of new house decoration, including: wall demolition, wall building, wall lifting, heating removal, plastic steel window replacement, etc. Demolition of garbage should be cleaned up in time to ensure the cleanliness of the room, so as to facilitate construction. At this time, the finished door, cabinet, range hood, cooker and water heater are determined together.

4. Hydropower transformation

It is not a simple matter to stick bricks on the wall, ceiling and add sockets. We must determine the exact position of switches, lamps and washing machines. Before the hydropower transformation, the cabinet shall be measured to determine the hydropower transformation scheme. According to the model of water heater you have determined, design the position of power supply and water interface; Leave a power socket on the wall below the basin to facilitate the installation of kitchen treasures; Air conditioning holes and power supply should be placed on this wall of the bedside as far as possible; Keep a distance of 20 cm between strong current and weak current.

5. Poly Pavilion

Because the kitchen and bathroom belong to humid environment, wooden keel cannot be used as the material of riser, so it is suggested to use light steel keel or red brick. When wrapping the pipeline, don't wrap the manhole, it is difficult to find out the cause of water seepage. Light steel keel saves space, but it is best to use it; At this time, you need to buy tiles, jointing agents and so on.

6. Gaiwa

Prepare the floor drain before tiling. Prepare to stick bricks after waterproofing; Soak the tiles in water before sticking them, and keep the broken tiles for cutting. At this time, the basin and faucet should be determined, and then the cabinet designer should be invited to visit; Buy paint, wall paint, diluted water, etc. If you put up wallpaper, you must decide first.

7. Oil workers went into battle

The effect of painting the wall depends entirely on the skill of the painter; The primer has good adhesion, which can make the wall more flat and reduce the amount of topcoat.

8. wallpaper

After the wall paint is painted, you can brush nitrocellulose paint on the wall where the wallpaper is pasted; Generally, you can dry it thoroughly every other day, and then ask the master to paste the wallpaper.

9, socket panel installation

The socket panel can be installed in half a day. Sockets should have switch function, especially electric cookers and microwave ovens in the kitchen, to avoid plugging and unplugging power; Although the socket with switch is good, we should pay attention to practicality.

10, ceiling part of kitchen and bathroom

Install the water heater and yuba first, and then seal the ceiling, which is more beautiful to connect.

1 1. Install the cabinet.

The range hood, cooker and sink are delivered on the same day and installed together with the cabinet; Contact the cabinet manufacturer in advance and bring the artificial stone countertops together.

The step flow of decorating the house by yourself 2 step flow 1: Design before installation.

Note: In the design process before installation, whether you are decorating yourself or looking for a decoration company, you should not only design the layout of the house according to your own wishes, but also pay attention to a detailed measurement of the house, and make clear several important dimensions, such as tile area, wall paint area, wallpaper area, building area and size information related to furniture.

Step 2: Go through the commencement formalities.

Consult the residential property, go through the construction procedures as required and pay the decoration deposit.

Step 3: Dismantle and modify the main body

It mainly includes wall smashing, wall building, wall covering and window sealing.

Step 4: Hydropower transformation

Hydropower transformation basically determines the overall layout of the house, so it should be fully considered when giving disclosure to the construction team. For details, please refer to the article "Collection of Conventional Dimensions of Home Decoration, Dislocation of Switches, Sockets and Water Outlet Causes Death".

carpentry

Woodworking, bricklayer and oiler are the "three brothers" in the construction process, and the basic order of appearance is: wood, tile and oil. The basic principle of appearance is who is dirty first.

Step 6: Stick wall tiles and floor tiles.

Wall brick needs to pay attention to the construction of joint directly, which is not handled well and affects the appearance.

Step 7: Wall treatment.

The "Third Oil Worker" enters the site, mainly completing the basic treatment of the wall surface, painting the top coat and brushing the furniture made by the "carpenter". Students who are ready to paste wallpaper only need to let the "third oil worker" do basic treatment on the wall surface where wallpaper is planned.

Step 8: Install the gas water heater.

After the wall and floor decoration is completed, you can inform the water heater to deliver and install.

Step 9: Ceiling in bathroom and kitchen.

Before the ceiling, it is best to prepare moisture-proof ceiling lamps, yuba, etc.