Floor first, back door, or door first, back floor?

Installing the door first can prevent the floormaster from going to the door for the second time to deal with the connection between the door cover and the baseboard.

note:

1. It is necessary to confirm the specific thickness of the floor, the moisture-proof pad and the corresponding buckle with the installer, and reserve the appropriate size, which basically eliminates the problem that the floor cannot be installed.

2. Protect the door panel in the later stage to avoid unnecessary scratching and wear of the door when installing the floor in the later stage.

Lay the floor first, then install the door.

Advantages:

1. Install the floor first, and then control the gap between the door and the floor more accurately when installing the door.

2. It can avoid the difficulty in installing the angle size between the floor and the door frame when installing the floor after installing the door.

Disadvantages:

1, when installing doors and windows, the installer will scratch the floor carelessly, and some garbage or sealant will stain the floor.

(Solution: The locksmith can be reminded to pay attention to protecting the floor, or a layer of waste paper board can be laid on the floor in advance for protection. )

2, the skirting line is not easy to collect (solution: let the door fitter help deal with the skirting line. )

3. If there is a buckle at the door, it is impossible to accurately determine the specific position of the door crack under the door. If the floor and buckle are installed first, if the door is not installed directly above the buckle, the buckle will be exposed and affect the appearance.

Villa master provides you with local architectural policies, architectural drawings and villa design drawings;

Villa appearance rendering service, you can choose from thousands of red-hot drawings: www.bieshu.com? bdfc