Traditional Culture Encyclopedia - Lucky day inquiry - What materials do you need to decorate the blank house according to the decoration steps?
What materials do you need to decorate the blank house according to the decoration steps?
(2) Choose auspicious day to start construction: 1. Make clear the areas involved in the decoration process: tiling, wall paint, wallpaper and floor;
2, clear the bearing wall size. We need to design the wall size of future furniture.
(3) The main body demolition includes wall demolition, wall building, wall covering, central heating demolition, and plastic steel window replacement. Garbage should be cleaned up in time.
☆ Buy finished doors, cabinets, range hoods, cookers and water heaters.
(4) Hydropower transformation: determine the exact location of switches, lamps, basins, bathtubs, washing machines, etc.
Before the hydropower transformation, the cabinet designer should take measurements at home to help you determine the transformation scheme of power supply and waterway. (The place where the bathroom wall is excavated and routed should be waterproof, and the waterproof paint should be brushed into the groove, so that the running water will not wet the wall in the future);
The water supply pipeline should be changed into concealed pipe (PPR pipe) as far as possible.
Suppression experiment (first close the valve that enters your water meter, and seal the outlet of the pipeline that needs to be suppressed with a plug, leaving only one entrance. Then, connect the pressurizer to the inlet. The so-called presser is a simple hand pump, which can last for a certain time after hitting a certain pressure. The specific pressure and duration are related to the material and function of the pipeline. Such as: aluminum-plastic pipe: 6-8 kg, 0.5- 1 hour, and the pressure drop is not greater than 0. 1kg);
Adjust the circuit according to the number and installation position of the supporting electrical appliances in the bathroom;
Note: It is also best to send someone to design the position of power supply and interface according to the model you have determined.
Leave a power socket on the wall below the basin to facilitate the installation of kitchen treasures. Toilets and kitchens are all small water treasures, and hot water comes quickly, which is more convenient to use.
Air conditioning holes and power supply should be placed on the wall of the bedside as far as possible to avoid air conditioning blowing directly at people in the future.
Keep a distance of 20 cm between the strong and weak points, such as a distance of 20 cm between the socket and the network cable.
The water pipe of the balcony must be slotted and concealed, otherwise the sunlight will easily lead to microorganisms in the pipe.
(5) Wrap the riser: wrap the ugly pipe. Considering the humid environment of kitchen and bathroom, the material of Baoli pipe must not use wooden keel! Even if the wooden keel is painted with antirust paint. The riser adopts light steel keel or red brick. Light steel keel saves space, but the most sturdy and easy to use is red brick.
☆ Buy tiles, jointing agents, etc. Furniture should be booked in advance, generally at least 15 days.
(6) Tiling: Before tiling, buy a floor drain. Buy a special washing machine or floor drain for the shower, and deodorize it. The existing PVC floor drain water retaining bowl is deep and has good deodorization effect, but it is not beautiful. Buyer's, round is not easy to cut bricks. If it needs to be replaced, remember to buy a cover plate and cover it when not in use. The water in the dry bowl in the north will soon evaporate. It is best to buy a floor drain that can be screwed to the lower outlet of the washing machine. Floor tiles should be kept at the lowest point. The hole before the toilet is installed is so big that the floor drain cover can fall off. If the floor drain is installed in your house and the toilet is not installed, pay attention to the floor drain cover or put it elsewhere for safekeeping. Moreover, if odor-proof floor drain or ultra-thin floor drain is used, it will greatly increase the difficulty of drainage. Some people say that slopes are unsightly, but I think this is nonsense. On the contrary, water with a large slope can flow clean quickly, which is very pleasant. Whether the washbasin cabinet drains water from the wall or from the ground should be decided in advance. It is best not to change the position of the original sewer and floor drain. If you can't change it well, it is the easiest to flood. If the floor drain was originally installed by the developer, don't take it out. As for the odor of floor drain, I suggest using deep sink floor drain. A 5 cm deep sink is very easy to use, and of course it should be poured into the floor drain regularly.
Waterproof: shower wall 1.8 m, non-shower wall 30~40 cm, and all floors. (Contract and materials) 60/ m2. "Waterproofing" has different construction methods according to different materials. Now take "Shanghai Huili 9 1 1" as an example: the top floor of the bathroom is the best waterproof, the kitchen is generally waterproof 1 m high, the ground is waterproof twice, 30 cm away from the wall, and the door needs to be covered. After waterproofing is completed and ready to dry, conduct a "water test" for 48 hours. After 48 hours, go to the next floor. If there are no wet marks on smallpox, it can pass, otherwise it is necessary to redo the waterproof layer The most easily leaking place is the "floor drain". Ground waterproofing agent should be used under supervision. My bricklayer didn't fall directly to the ground as required. Can it be unified? If it really doesn't work, you'd better do it yourself. Don't bother, but rest assured. It is best to make waterproof and polyurethane coating on the bathroom wall and floor. General 50 yuan/square meter price.
After a nap, we are going to stick bricks: laying wall bricks; Finally, lay the floor and paint it;
Make the wall as rough as possible before sticking bricks, which can increase the contact stress area between cement and wall. The specific method is to drill more holes in the wall with an electric drill, the more the better. Now some decoration companies call this napping, which is actually a bit deceptive. Brick flowers should be aimed at the door; Bricklaying must require the bricklayer to pull the steel wire, supplemented by a spirit level, and insist that he use tools to control the quality. Be sure to use a level or aluminum alloy as a ruler for inspection.
Prevent hollowing, and check that the hollowing of tiles can't be knocked just after pasting. It is best to wait for two or three hours before knocking, paying special attention to the four corners of the tile. I suggest you knock one by one. When you hear an empty drum, you must rework it. Don't be soft-hearted
White cement hooks should not be used to connect tiles. If it doesn't turn black in a month, use jointing agent.
Floor: (contractor and contractor) 15/ m2. The slope of the bathroom floor should be considered before laying bricks. According to the national slope, it is impossible to achieve the effect of rapid drainage, and if odor-resistant floor drains or ultra-thin floor drains are used, the difficulty of drainage will be greatly aggravated. Some people say that slopes are unsightly, but I think this is nonsense. On the contrary, water with a large slope can flow clean quickly, which is very pleasant. In addition to the normal precautions for sticking tiles, the tiles are soaked in water and dried in the shade; In addition to cutting broken tiles, I personally emphasize the overall beauty of tiling. Simply put, the width of the brick on the wall should not be less than 10 cm. This often happens when sticking bricks. For example, the wall width is 1 m, the brick is 32*32cm, and the normal pasting method is 3 whole 1. But 32× 3 = 96, the jointing space of 1 cm should be reserved. Finally, the remaining small bricks can only be pasted 3cm wide. As long as you make it clear to the bricklayer in advance, the width of the brick on the wall should not be less than 10 cm. He can cut bricks on both sides. Let's take a wall just 1 meter wide as an example, and it becomes 2 whole and 2 small. 32× 2 = 64, reserved 1 cm for jointing, and the small bricks on both sides are 17.5cm, but this will cost bricks, so please make a profit before buying bricks.
Tiles: Don't lay ordinary clothes just because the laundry room is not very important. Be sure to lay them well. If the color of tile joint filler is matched with toner, it is best to debug it before deciding the dosage, otherwise it is either too light or too deep. The slope of the bathroom floor should be considered before laying bricks. According to the national standard slope, the effect of rapid drainage can not be achieved, and if odor-resistant floor drain or ultra-thin floor drain is used, the difficulty of drainage will be greatly aggravated. Some people say that slopes are unsightly, but I think this is nonsense. On the contrary, water with a large slope can flow clean quickly, which is very pleasant. If the bathroom floor is higher than the lobby, it can be solved by the transition of the doorstone. It is difficult to find a floor tile with a satisfactory color, so I didn't find it. However, two unsatisfactory colors can be staggered and then turned at a 45-degree angle to achieve satisfactory results. This is a good suggestion put forward by the bricklayer himself. For the floor tiles in the bathroom, because the floor drain should be at the lowest point, it is best to put the slope when laying bricks, and it is best to put bricks with a smaller slope.
Calculation: the length and height of the wall. If a bathroom has four walls, the length and height of each wall should be measured. Then deduct the area of a window and door. Finally, calculate the area of the ground. After you have measured your size, you can also take it to the shop selling tiles, and they will help you satisfy it again. Just add a 5% loss.
When sticking tiles, pay attention to ① it is best to be on site; ② Some imperfect tiles can be pasted by workers in some invisible places in the future, such as cabinets, sinks and mirrors. And be careful not to let the workers stick the tiles and waist bricks on them, otherwise you will not see anything in the future and spend money. (3) Before the wall brick and floor tile are pasted, the soaking time must be enough. (4) The floor drain must be plugged with something to prevent the cement from falling and blocking. The floor drain in my house is blocked by falling cement. Looking for the management office to clear 30 doors and get a lot of mud. ⑤ When people are on site, workers will not waste too many tiles. Do not use edge lines for the outer corners of tiles. Bricklayers polish at a 45 degree angle to look good. If you don't mention bricklayers, of course, you choose a lazy way of doing things. After the ceramic tile is pasted, there can be no hollowing of the whole brick (local hollowing cannot exceed 20% of the whole brick). If the whole brick is empty, it needs to be reworked. In general, for every 100 tile pasted, 1 tile is allowed to be hollowed out, and 2 tiles are allowed to be hollowed out, but they must be reworked. The owner is responsible for reworking the main materials (already included in the loss).
Tips: Don't buy matt tiles in the kitchen, otherwise it will be difficult to wipe greasy tiles. Don't use Tai Su bathroom tiles. First, it is easy to get dirty. Second, it is too dull after a long time! Good quality floor tiles have uniform size and thickness, smooth surface, no bubbles, stains and pits, bright colors, uniform luster, no defects in corners, 90-degree right angle, no deformation, clear patterns, good compression resistance and no damage. It is difficult to find a floor tile with a satisfactory color, so I didn't find it. However, two unsatisfactory colors can be staggered and then turned at a 45-degree angle to achieve satisfactory results. This is a good suggestion put forward by the bricklayer himself.
Ceramic tiles are divided into floor tiles, wall tiles and waist line tiles according to their functions. Floor tiles: according to color, they are divided into imitation Spanish tiles, vitrified polished tiles, glazed tiles, non-slip tiles and infiltration polished tiles. Wall tiles: according to color, it can be divided into vitrified wall tiles and printed wall tiles. Waist brick: mostly printed brick. In order to meet the specifications of wall tiles, waist line tiles are generally set to a width of 60 mm× 200 mm, and tiles are divided into glazed tiles, whole-body tiles, polished tiles, vitrified tiles and ceramic mosaic tiles according to the process. Glazed brick: refers to a brick with a glazed surface. This kind of brick is divided into two types: one is fired with clay; The other is made of porcelain clay. At present, about 80% home decoration buyers choose this brick as the floor decoration material. Full-body brick: this is a kind of unglazed porcelain brick with good anti-slip and wear resistance. Generally speaking, "non-slip floor tiles" are mostly bricks. This kind of brick is moderately priced and very popular with consumers. Polished brick: The whole brick becomes polished brick after polishing. This kind of brick has high hardness and is very wear-resistant. Vitrified brick: this is a kind of porcelain brick fired at high temperature, which is the hardest of all tiles. Sometimes polished tiles are scratched, but vitrified tiles are still safe and sound. Ceramic mosaic: also known as mosaic, it has many specifications, thin and small, hard texture, acid resistance, alkali resistance, wear resistance, no water seepage, strong compression resistance, not easy to break, diverse colors and wide application. If it is a polished brick, it needs to be treated with antifouling on the surface. If it is retro brick or vitrified brick, there is no need to make anti-fouling layer. Ceramic wear-resistant floor tiles have been laid, using dry laying method. Floor tiles need to be soaked in water before laying, so that they will not blister after soaking. It usually takes about 15-30 minutes. The use of ceramic tile adhesive, also known as dry bonding method, is a new type of paving auxiliary material. Tiles do not need to be soaked in water in advance, and the base surface does not need to be wet. As long as the basic conditions of the pavement are good, the working conditions can be greatly improved. Its bonding effect is also better than that of traditional mortar cement, and it is especially suitable for small and medium-sized projects and home decoration with less operation and unsatisfactory working environment. Glue must be added to the cement mortar for sticking bricks, so it is not necessary to add glue to the cement mortar that has been glued when sticking bricks formally, but it is best to soak the bricks in water before sticking them and dry them in the shade before sticking them. There are two ways to deal with the yin-yang angle of ceramic tiles: directly use the ready-made yin-yang angle line, which is easier to do; Another method is that the bricklayer grinds the edge of the tile into a 45-degree angle. When two polished tiles touch this angle, a complete 90-degree outer angle will be formed, which is laborious and demanding. Personally, I think touching corners is better. The height difference is not big, which can be solved by lintel, and the tile laying height under the reinforced floor is low. It would also be better to add a cushion to your feet. Before tiling, the wall should be whitened, then the wall should be wetted with water, and then the slurry should be thrown on the wall with plain cement mortar of 1: 1.5:0.2, so that the brushed wall is not easy to bubble and crack. What should be made clear to the workers in advance is: how to deal with the wall foundation, how to solve the cracks, scrape putty several times, brush the wall paint several times and so on. Cement cannot be used for more than three months after delivery. Different varieties and grades of cement cannot be mixed. Yellow sand must be river sand. When you taste it with your mouth, you know that there can't be two rows of incomplete bricks on a wall. Clean the tiles immediately after wiping the seams. When the wall brick touches the nozzle, it should be cut in the form of a sleeve, so that it looks like a whole brick.
The method of selecting ceramic tiles: first, look at whether the color is uniform, without variegated colors, holes and black spots; Secondly, it depends on whether its size is standard. Measure the length and width of the tile with a tape measure. The measured size should be consistent with the factory size of its trademark, and then measure the diagonal of its tile. If the diagonal size is consistent, the tile is positive; Next, it depends on the flatness of the tiles. The simplest and most effective way is to overlap two tiles of the same brand. If two tiles overlap and have obvious gaps or can rotate, the tiles are uneven. Finally, it depends on whether the tiles have color difference. The method is to take out several samples of the same type of tiles and compare them in a bright place. If there is no color difference, you can order it. Wear and tear must be considered when buying ceramic tiles. It is better to buy more tiles before returning them, instead of rushing to replenish them at the last minute. Replenishment is basically self-help, which will be very troublesome and patient (and you can pay more if you buy more). It is best to stick old newspapers or plastic films in the kitchen after tiling. If your workers are cooking in the kitchen, an important part of your cleaning work after renovation is to clean up the kitchen oil stains first. The color of the floor tile is too light, and the hair and footprints are obvious. I wish I could shave my head barefoot. You can knock when you choose, and the sound is crisp, indicating that the porcelain density and hardness of the tile are high and the quality is good; You can also measure the water absorption of tiles. The lower the water absorption rate, the higher the inherent stability of ceramic tiles, and the more suitable for spaces with high water content (such as bathrooms and kitchens), and there will be no problems such as black spots. The simplest detection method is to pour a glass of water on the back of the tile, and the water stains spread quickly, indicating that the water absorption rate is high, and vice versa. Check the surface quality of tiles. Hard objects can be used to scrape the glaze of ceramic tiles. If traces are left, the quality will be poor. It depends on whether the color of the tiles is clear. Look for pinholes with the naked eye. Pinholes are prone to fouling. Finally, observe the flatness of the tiles. The side is straight, easy to spread and good in effect.
Walls and floor tiles: If the balcony is on the top of the balcony, adding a layer of foam plastic board on the back of the cabinet will have a good heat insulation and waterproof effect. The balcony must be tiled! The corner of the balcony should be paved in a circle, and the life balcony should be paved to the same height as the railing. If your home has two balconies (life balcony and viewing balcony), there is no need to buy too good tiles, as long as they are beautiful and practical. The reason is: you don't clean it every day, its function is to decorate local space! Of course, the sunny side should consider buying anti-ultraviolet ones, otherwise the fading will affect the appearance! The side of the kitchen near the cupboard must be better (it is a big mistake to think that the side with the cupboard is cheap! )! The reason is: you have to clean it every day, whether it is oil, water, detergent or Wujing powder. If it is a bad brick, it will lose porcelain in a short time! It is suggested that the best kitchen should not buy matte bricks, which are difficult to clean! Just buy medium kitchen tiles. You can buy something cheaper on the other side of the wall, which will make the kitchen more layered! Might as well try. The walls and floor tiles of the bathroom should be slightly better, because the utilization rate of the bathroom is high and humid. It is best not to buy pure white bathroom floor tiles! The levelness of floor tiles is allowed to have an error of 2mm, the gaps of floor tiles must be consistent, and the diagonal between bricks should be straight (an error of 0.5mm is allowed). Except the diagonal between bricks, kitchen and bathroom tiles should be flat, horizontal (allowable error 65438±0mm) and vertical (allowable error 2mm). Floor drain should be considered for the floor tiles in the bathroom and balcony, and the slope should be put first without special reasons.
☆ Buy birdbath, faucet, paint (ready mixed paint or transparent paint), wall paint, nitrocellulose paint, diluted water, etc. If wallpaper is pasted, please invite a cabinet designer.
(7) Oil workers go into battle: Note: Any carpentry work, even if it is just a pass, should follow this step, the core plate sinks to the bottom, and then the veneer is painted. Now you don't have to brush mixed oil, but use spray. Workers had better spray white on the inside of the door and the meter box, which is beautiful and not wasteful. There's nothing to say about painting the wall. The effect of leveling, grinding and rolling depends on the skill of the oil worker. Paint the walls and pay attention to color matching. The color is lighter than the color card, because the top coat will be brushed at least twice, and some will be brushed three times, and the color on the wall will become darker and darker. As for whether the painting method is spraying or roller coating, it is said that the spraying effect is better, but once it is necessary to touch up the paint, it becomes extremely difficult.
(8) wallpaper: wallpaper is much better than painting the wall. After the wall paint is painted, the oil trade union paints nitrocellulose paint where wallpaper needs to be pasted. The paint can be dried thoroughly the next day, and then the master is invited to paste the wallpaper. At first, I was worried that pasting wallpaper would stain the painted white wall, but later I realized that pasting wallpaper was really a clean job! My worry is completely unnecessary. Note: Do not open the window for ventilation within 48 hours after the wallpaper is pasted, and let it dry slowly in the shade. Tell the master that if something gets stuck, you should ask him to help repair it.
☆ Buy panels, sockets and lamps.
(9) Installation of socket panel: The socket panel can be installed in about half a day. Install as many decorations as the power socket can hold, or there will be drag boards everywhere in the house. In addition to leaving a socket near the washbasin, there should also be a (later small water heater) in the cabinet under the washbasin and a (later toilet) near the toilet. Also, it should be noted that considering the distance of the plug, the socket should not be placed in a narrow place behind the door. It is best to buy a socket with a panel, which is not easy to be damaged for a long time.
Reminder: 1, it's best to buy a socket with switch function, especially in the kitchen, so that the rice cooker and microwave oven can be controlled without plugging in and out the power supply. 2. Although the socket with switch is good, we should pay attention to practicality. Five-hole power supply with switch, three sockets are flat, so be sure to use more sockets, even if it has no switch control!
☆ Buy ceilings for bathrooms and kitchens; If you need to install Yuba, please buy and install it before the ceiling.
(10) suspended ceiling: whether to install water heater and yuba gas water heater or electric water heater first, we should consider it clearly from the beginning. If it is a gas water heater, add water, electricity and gas pipes to the kitchen. If it is an electric water heater, consider which corner to put in the bathroom in the future (vertical floor-standing type has high thermal efficiency). Of course, if there is really no place to put it, it can only be placed on the load-bearing wall (level). After installation, the ceiling edge sealing can better semi-package the water heater, that is, the connection is more beautiful.
Note: 1, it is best to buy aluminum button ceiling, even if it is demolished after many years, it is worth a lot of money to sell waste aluminum. On the other hand, pvc gusset plates look good, but the quality and performance are average, and plastic things are worthless even if they are sold as waste. 2. Buy gusset plates, and ask the price of the whole package. Don't buy gusset plates and corners separately. But the installation fee is extra.
Ventilator: it is best to install it on the vertical plane of flue, and it will produce * * * vibration when installed on the aluminum roof. Ventilation fans and range hoods must be equipped with one-way baffles, and the outlets should be carefully sealed to prevent outdoor odor from flowing backwards.
Install sanitary ware such as toilet and washing equipment such as washstand.
Sanitary ware: for Huida and Wrigley. The main considerations in buying sanitary ware are water saving, appearance and noise. Considering its advantages and disadvantages, I would rather buy the cheapest brand than try the best brand! This is the secret of shopping. Cheap may be "unfashionable", but technology and after-sales service should be the same, as long as they are practical. Installation must find professional workers to install, so as not to affect the usability! Sanitary ware should be selected first, and the position of drainage and water pipes should be arranged well, otherwise it will be ugly to connect many pipes, and people who know how to look at sanitary ware need to be found. Some things that look good may not be installed. The detection method of sanitary ware is to use cigarette butts to detect, and it is best to wash them at one time. Sanitary ware is a good one, and it will leak if it is separated for a long time.
Basins are divided into three types: the platform basin, the platform basin and the column basin. The basin under the platform is that the basin body is embedded under the countertop, and the basin edge can't be seen from the countertop. This basin is generally used with marble or granite countertops. Because the basin is below the countertop, it pays more attention to use. The basin mouth under the platform is better in the factory than in the field, and the field grinding is time-consuming and the effect is very poor. It should be noted that the pre-opening position must be accurate. The basin edge on the table is higher than the table, so the decorative effect is also very important on the premise of paying attention to practicality. Therefore, when designing the countertop basin, each manufacturer has its own strengths and produced some artistic products. The basin on the table is not conducive to the health of the countertop, so consider buying a whole basin cabinet from the perspective of convenience and beauty, and it is best to buy a basin under the table! The column basin is independent, and there is a supporting column below it. Sometimes this column doesn't bear the weight of the basin, just to cover the sewer pipe. Generally used in smaller bathrooms. The toilet bowl is too high and inconvenient, and the height is controlled at about 85CM! The basin under the platform is more exquisite, beautiful and easy to clean than the basin on the platform. Pay attention to the faucet under the platform. Considering the thickness of the basin edge, the faucet mouth should be longer. It is suggested that the bathroom be a countertop (if possible), so that you can save your old age! Be sure to install an S tube under the washbasin, otherwise it will stink when washing your face. When installing the wash basin, we should consider the relative position with the mirror, the shelf for putting the toothbrush cup and the towel rack. Whether the washbasin cabinet drains water from the wall or from the ground should be decided in advance. It is best not to change the position of the original sewer and floor drain. If you can't change it well, it is the easiest to flood.
Cabinet: it is best to have a cabinet in the bathroom, which can put some bathroom supplies; The cabinets in the bathroom can be customized by the cabinet company, but metal feet should be hung below, otherwise it will be difficult to repair after water leakage, and it is also convenient to clean at ordinary times. Bathrooms must be waterproof, including floors and walls. The size of washbasins and faucets should match the bathroom tiles with waistlines and tiles. Think ahead, and don't block or conflict when loading other things in the future.
Basement cabinet: stainless steel feet used in toilets are profiteering, so it is very cheap to find some places on the back of the store. When making a bathroom basin cabinet, we should first consider the size of the basin, so as not to put it down in the future.
Silica gel: If you buy silica gel, GE imported from abroad is definitely the best, followed by GE packaged in Shanghai. Of course, if it is used in a very unimportant place, 8 yuan can also be used. For example, the interior of the aluminum alloy window frame is completely blocked with garbage-grade silica gel. However, the bathroom and kitchen are made of GE silicone, which is worth it!
Toilet: Farnsha brand is good. Comparison of three series toilets: whirlpool is quiet; Flushing is a traditional way, which costs water; Spray to save water. When buying a toilet, be sure to decide whether you need to go into the water first or later!
Hardware: China Airlines is cheap and of good quality; Too much hardware is not good, it will be messy and waste money. It's best to have a movable shelf, plus a countertop, a towel bar, a toilet brush, a tissue holder and a towel rack. You can buy some clothes hooks behind the door. It is recommended to buy hardware instead of going to the building materials market. Although it is a little cheaper, the quality is really not guaranteed! If you use it for a long time, it will either fall off or rust! I can only buy this one, but there will be a few black holes on the wall! Don't buy a double towel rack. This is a towel rack for hanging towels. There are two poles and one pole. Don't think two poles are beautiful, you can hang two more towels, but this is not the case. Towels with different uses cannot be hung together. That is to say, two towels are hung on a towel rack, and no extra poles are needed. It is still very practical for a pole. The glass shelf for cosmetics in the bathroom is of good quality.
Faucet: A broken faucet will drip by itself, or it will rust inside the faucet after a long time. Choose a good brand. When installing faucets, pay attention to the same direction of hot and cold water for all faucets in the house. Don't let cold water be on the left side of this faucet, and hot water is on the left side of that faucet. Don't connect the toilet water to the hot water pipe, or the water heater will catch fire as soon as the toilet rushes here. The distance between hot and cold water holes of faucet is about 16cm, which can be adjusted within a certain range, and the reserved outlet should not be too large or too small. Don't install the faucet on the side of the door cover, or the water vapor will make the door cover wet! Triangle valve should not be omitted. If triangle valve is installed, it can be found whether there is water leakage at the copper joint in advance. If you don't install it, you can only check whether the internal connection installed at that time leaks when you finally install the faucet to take over the copper joint. Because water leakage always needs to be pressurized for a period of time, it is not safe to install the internal connection and faucet at last.
- Related articles
- September 8, 2020, how about July 21 of the lunar calendar?
- When will Jining Puhuicheng Blue-collar Apartment be delivered?
- Which day is suitable for haircut in the second half of 2023?
- 20 17 auspicious day of the zodiac, which is auspicious day in June?
- May 2023 17 can I get married?
- Touching wedding speech
- Which calendar software is better on the mobile phone?
- What Buddhist festivals are there in 2022?
- How to read it?
- 165438+20221October 18, is it a lucky day to have a wedding reception? How about 165438+2022 10/8?