Traditional Culture Encyclopedia - Lucky day inquiry - Home improvement technology strategy, construction novices are not afraid.

Home improvement technology strategy, construction novices are not afraid.

As we all know, home improvement is to "materialize" various situations in life into the room. The design of the purchased ordinary house has been completed, and no major adjustment is possible. So, the rest can be decorated. Let's take a look at the concrete process of Tuba Rabbit Bian Xiao.

Detailed family decoration process in history

(1) Tools are in place and ready.

Be sure to get something ready in your bag before decorating. Tape measure (buy 5 meters, not 3 meters), calculator, large plate clip (clip list, receipt); In addition, it is best to prepare old towels (soft cotton, ceramic tiles) and plastic bags (wrapped at the pipe joints to prevent dirt from blocking) at the construction site.

(2) Choose two auspicious days and start shooting.

Before the workers enter the site, it is best to measure all corners of the house and do it yourself. Write down the ruler and mark it clearly. Don't be lazy. The measurement contents mainly include:

1, the area involved in the decoration process. Especially in tile area, wall coating area, wallpaper area and building area;

2. Clear the size of the main wall. Especially it is necessary to design the wall size of furniture in the future.

At this time, you should buy a radiator.

(3) Remove the main body to make the space more practical.

The main body is the first project, which mainly includes wall demolition, wall building, wall skin, heating demolition, plastic steel windows and so on. The demolished garbage should be cleaned up in time to ensure the cleanliness of the room and facilitate the construction.

☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆.

☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆

(4) hydropower transformation, arrange the use of each space.

Hydropower transformation, do not regret eating. The wall is brick and the ceiling is open, so it is difficult to add a socket. Therefore, be sure to determine the exact location of switches, lights, pools, bathtubs, washing machines, etc.

Before the hydropower transformation, the cabinet designer should go to the door to measure and help you determine the power and waterway transformation design.

For water heaters, it is best to send someone to design the position of power supply and interface according to the model you have determined.

Remind you: on the wall under the sink, it is best to leave a power socket for easy installation.

Air conditioning holes and power supply should be placed on the bed wall as far as possible to prevent air conditioning from blowing people directly.

Keep a distance of 20 cm between strength and weakness. For example, there should be a distance of 20 cm between the socket and the network cable.

(5) Be sure to wrap the ugly tube.

Considering the humid environment of kitchen and bathroom, wooden keel must not be used as the material of riser! Everyone must be careful, even if the wooden keel is painted with antirust paint, it is not good.

Remember, bare keel or red brick. Light steel keel saves, but the most sturdy and easy to use is red brick.

☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆973 ☆☆☆☆

☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆?☆☆☆97

Buy a floor drain.

Note: The floor drain was bought in the East, which is useless. Buy a special washing machine or shower floor drain to deodorize.

After waterproofing is finished, you can stick tiles.

In addition to the normal attention to tiles, soak tiles in water and dry them in the shade; The broken tiles are kept for cutting, and I personally emphasize the overall beauty of the tiles. Simply put, it is a brick on the wall, and its width cannot be less than 10 cm. This often happens when tiling bricks, such as wall width 1 m, brick 32 * 32cm, and the normal decoration method is 3 whole 1 small. But 32×3 = 96, the space of 1 cm should be reserved. Finally, the small brick can only be 3 cm wide. I'm not picky. A narrow brick was trapped there. How ugly.

As long as you explain clearly to the bricklayer in advance, the width of the brick on the wall is not less than 10 cm. He can cut bricks on both sides. Or take a wall with a width of 1 m as an example, it will become 2 whole and 2 small. 32×2 = 64, joint 1 cm, small bricks with 17.5 cm on both sides. So it looks not only symmetrical on both sides, but also the whole wall will not be narrow.

However, this method is very expensive. Please buy wealth first, then buy bricks.

☆☆☆☆☆☆ At this time, it is necessary to confirm the basin and faucet, and the cabinet designer will come to the door for the second time. ☆☆☆☆

☆☆ At the same time, wallpaper such as paint (ready mixed paint or transparent paint), wall paint, paint and diluted water must also be fixed ☆☆.

(7) Oil workers fight and brush.

If you don't buy a finished door, let the master do it.

Note: Any wood products, even just mouthwash, must follow this step. The core board sinks, faces, and then can be painted. When mixing oil, an irresponsible worker is lazy and brushes oil directly on the big core board. This is absolutely wrong. Don't believe the story of selling big core boards, you can brush oil directly on them. Remember, brush the oil directly, it won't take long, you must crack it all, remember to remember.

Now mix, don't use a brush, use a spray. Workers had better spray the white inside the door together with the instrument box. It's not wasteful and beautiful.

There is nothing to say about wall painting, leveling, grinding and rolling. The effect is very good, and it definitely depends on your oil worker's skill.

My home is painted white except the wallpaper. Need to remind everyone that if the wall is painted with color, you must pay attention to the color, which is lighter than the color card and must not be darker than the color card, otherwise you will regret it. Because the wall is painted at least twice, about three times, the color of the wall above will be darker than that of the first layer.

The method of painting is spraying or roller coating. Different people have different opinions. I've used roller coating, not spray coating. It is said that the spraying effect is better, but once it is damaged, the coating will become difficult. I believe everyone will know more or less about the above contents, and I hope this article can help you. You can also log in to Tuba Rabbit to view and subscribe to more relevant content and information.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp; Wb, you can get it for free ~