How to decorate the house? Matters needing attention in house decoration?

For the owners who are renovating for the first time, the renovation of the house is a rather annoying thing, so when decorating the house, we must first understand it clearly and then carry out the renovation, so that problems will not easily occur. Next, let's introduce how to decorate the house and the matters needing attention in house decoration. Let's have a look. For the owner of the second decoration, the decoration of the house is a rather annoying thing, so when decorating the house, we must first understand it clearly, and then carry out the decoration, so that problems will not easily occur. Next, let's introduce how to decorate the house and the matters needing attention in house decoration. Let's have a look.

First, how to decorate the house

(1) Tools are in place and ready. A few things that must be prepared before decoration must be put in your bag. Tape measure (buy 5m, not 3m), calculator, big board clamp (for bills and receipts); In addition, prepare old towels (soft cotton, used to wipe bricks after pasting) and plastic bags (wrapped around the pipe joints to prevent dirt from blocking) at the construction site in advance.

(2) Choose an auspicious day and start shooting. Before the workers enter the site, they personally measure every corner of the house, write it down with a pencil ruler and mark it clearly. Don't be lazy. The contents of the measurement mainly include:

1. Define the areas involved in the renovation process. Especially tile area, wall paint area, wallpaper area and floor area;

2, clear the bearing wall size. Especially it is necessary to design the wall size of furniture in the future.

PS: It's time to buy a radiator.

(3) Demolition and renovation of the main body make the space more practical (related reading: What materials are mainly used for decoration) Demolition and renovation of the main body is a worldwide project, mainly including wall demolition, wall building, wall skin, heating, plastic steel windows and so on. Remove the garbage in time to ensure the cleanliness of the room, but also for the convenience of construction. PS: At this point, it's time to finalize the finished product door; At this time, the cabinets, range hoods, cookers and water heaters have been thoroughly explored and can be determined.

(4) hydropower transformation, arrange the use of each space (related reading: precautions for hydropower transformation) hydropower transformation, no regrets. Bricks are stuck on the wall and the ceiling is sealed, so it is difficult to add another socket. So be sure to locate the switches, lights, basins, bathtubs, washing machines and so on. Before the hydropower transformation, the cabinet designer should do a household survey to help you determine the transformation plan of power supply and waterway. Water heater, also send someone to design the position of power supply and interface according to the model you determine. Remind you: Leave a power socket on the wall below the basin to facilitate the installation of kitchen treasures. Air conditioning holes and power supply should be placed on the wall of the bedside as far as possible to avoid air conditioning blowing directly at people in the future. Keep a distance of 20 cm between the strong and weak points, such as a distance of 20 cm between the socket and the network cable.

(5) Wrap the riser and the ugly pipeline. Considering the humid environment of kitchen and bathroom, the material of riser must not use wooden keel! Everyone must be careful, even if the wooden keel is painted with antirust paint. Remember, the vertical pipe is made of light steel keel or red brick. Light steel keel saves space, but the most sturdy and easy to use is red brick. PS: At this time, we need to buy tiles, jointing agents and so on. Furniture should be set in advance, and the construction period should be kept well, generally at least 15 days.

(6) Tiling, buy a floor drain for things with solid texture (related reading: Precautions for Tiling) before tiling. Note: buy a special washing machine or shower floor drain to deodorize. After waterproof napping, we are ready to stick bricks. In addition to paying attention to sticking tiles normally, tiles should be soaked in water and dried in the shade, and broken tiles should be left for cutting. Personally, I emphasize the overall beauty of tiling. Simply put, the width of the brick on the wall should not be less than 10 cm. This often happens when sticking bricks. For example, the wall width is 1 m, the brick is 32 * 32cm, and the normal pasting method is 3 whole 1. But 32? 3 = 96, the jointing space of 1 cm should be reserved. Finally, the remaining small bricks can only be pasted 3cm wide. I'm not picky. A narrow brick is stuck there, which is ugly. As long as you make it clear to the bricklayer in advance, the width of the brick on the wall should not be less than 10 cm. He can cut bricks on both sides. Let's take a wall just 1 meter wide as an example, and it becomes 2 whole and 2 small. 32? 2 = 64, the jointing of 1 cm is reserved, and the small bricks of 17.5cm on both sides are enough. In this way, it seems that not only the two sides are symmetrical, but also the whole wall will not have a narrow one there. However, this practice costs bricks, so please make a profit before buying bricks. PS: At this time, the basin and faucet should be determined, and the cabinet designer should be invited to visit for the second time; At the same time, buy paint (ready mixed paint or varnish), wall paint, nitrolacquer, diluted water, etc. Such as wallpaper, you must also decide first.

(7) Oil workers go into battle and wash and brush. If you don't buy a finished door, let the worker master do it. Note: Any carpentry work, even if it is just a pass, must follow this step, the big core board sinks to the bottom, and the veneer is painted again. It is wrong for irresponsible workers to brush oil directly on the big core board when adjusting oil. Don't believe the story of selling big core boards. It is no problem to brush oil directly on them. Remember, brush the oil directly, and it won't take long for it to crack completely, remember to remember. Now you don't have to brush mixed oil, but use spray. Let the workers spray white on the inside of the door and the meter box, which is beautiful and not wasteful. There's nothing to say about painting the wall. The effect of leveling, grinding and rolling depends on the skill of your oiler. My house is painted in white except wallpaper, and I haven't painted it. Need to remind everyone that if you want to paint the wall, you must pay attention to color matching. The adjusted color is lighter than the color card, and it must not be the same as or darker than the color card, otherwise you will regret it. Because when you paint the wall at least twice, some even three times, the color of the upper wall will get darker and darker. Different people have different views on whether to spray or roll coating. I use roller coating at home, but I have never tried spraying. It is said that the spraying effect is better, but once it is damaged, it becomes extremely difficult to touch up the paint.

(8) wallpaper, the effect of pasting wallpaper on a beautiful wall is much better than painting the wall. After the wall paint is painted, the oil trade union paints nitrocellulose paint where wallpaper needs to be pasted. The paint can be dried thoroughly the next day, and then the master is invited to paste the wallpaper. At first, I was worried that pasting wallpaper would stain the painted white wall, but later I realized that pasting wallpaper was really a clean job! My worry is completely unnecessary. Note: Do not open the window for ventilation within 48 days after the wallpaper is pasted, and let it dry slowly in the shade. Tell the master that if something gets stuck, you should ask him to help repair it. PS: It's time to buy panels, sockets and lamps!

(9) Installing the socket panel The socket panel can be installed in about half a day. Remind you:

1, socket with switch function, especially in the kitchen, so that the rice cooker and microwave oven can be controlled without plugging and unplugging the power supply.

2. Although the socket with switch is good, we should pay attention to practicality. According to my observation, all three sockets of the five-hole power supply with switch are flat. Once your electrical appliance needs three round sockets, there will be the depression of using plug-in boards when the sockets are empty. Therefore, multi-purpose sockets must be used, even if it has no switch control! PS: At this time, you should buy a ceiling for the bathroom and kitchen; If you need to install Yuba, please buy it and install it in front of the ceiling.

(10) Kitchen and bathroom ceiling, seal the last ugly part, install water heater and yuba first. After installation, the ceiling edge can better semi-package the water heater, that is, the connection is more beautiful.

note:

1, buy aluminum button ceiling, even if it is demolished many years later, it is worth a lot of money to sell waste aluminum. On the other hand, pvc gusset plates look good, but the quality and performance are average, and plastic things are worthless even if they are sold as waste.

2. Buy gusset plates, and ask the price of the whole package. Don't buy gusset plates and corners separately. But the installation fee is extra.

(1 1) Installing cabinets, the birth of Midea's whole kitchen cabinet is a coordinated project, and the range hood, cooker and sink should be arranged in advance. Delivered on the same day and installed with the cabinet. It was agreed with the cabinet factory in advance that the artificial stone countertops cut off from the stoves and sinks should be brought here, and things with more money should not be given to the factory for nothing. It is very useful to install a water meter and water pipe.

(12) Installation of finished doors Finished doors should be installed before the floor, mainly because the installation steps of doors are complicated, such as hinges, door locks, door suction, door frames, etc. , and use a lot of tools. If the floor is installed first, it is difficult to avoid bumping. In my house, the floor is installed first and then the door is installed. There are many small holes in the floor, and the meat hurts.

(13) It is suggested to install clothes hangers, curtain rods, lamps, sanitary ware and bathroom hardware before installing the floor, and fix these items with loose dust one by one.

(14) Before installing the floor, it must be leveled. Many floors in the neighbor's house are useless for leveling, so Lao Mao and I are careless. Unexpectedly, after the floor was paved, the corridor was very flat and depressed. So we're going to take it down, smooth it with quick powder, and then put it on again. Prepare a little pepper in advance, don't buy the so-called insecticidal powder brought by the floor workers, just let them spread it along the kicking angle. Workers must not cut the floor in the house, cut in the corridor and finally clean the corridor.

(15) At the end of radiator installation and decoration, it is the easiest to be negligent. Be sure to make it clear to js in advance that if the seal on the installation sheet is not the manufacturer's seal, it will not be signed. Pay attention to the installation list (not the purchase list) of radiator. Who is the stamped part? Many js operate in this way, and the purchase order is stamped with the manufacturer's seal; The single cover is the seal of the installation team. So, the so-called? Promise? Year? It's just the radiator itself, but the material is either steel or copper and aluminum. As long as it can leave the factory, there are almost no quality problems. The most error-prone place is installation! If you agree to seal the installation team, it basically means that you give up the right to pursue the responsibility of the manufacturer. Once the floor is soaked and the home is flooded, the manufacturer shirks the responsibility and the installation team can't find anyone. The so-called warranty can only be borne by the user himself.

(16) The embodiment of cleaning in agricultural reclamation, in my opinion, is to clean the glass. It is a terrible thing to climb out and clean such a tall building. Secondly, floor waxing, you have to buy your own wax, which is cheap and easy to use, but you must use a clean waxing machine, which is dozens of times faster than manual waxing. As for the rest, I don't think we need to rely too much on cleanliness. They just scrape around with small blades, which is not smart. So, after cleaning, I will do it again seriously. Go to the supermarket to buy bags? Wu Jiefen? Bring some old towels. Wipe old towels with dry five-clean powder, from door to door, from tiles to kicking corners, from one house to another. Don't be lazy, the result will make you proud.

(17) furniture and household appliances enter a brand-new home, and furniture bears the brunt. Bed, mattress, wardrobe, shoe cabinet, sofa, dining table, etc. Reminder: Before the furniture enters the market, you should prepare the following items: disposable shoe covers (don't buy poor quality ones, they will break when you step on them), several boxes of activated carbon, ladders, floor protective films (carrying wardrobes, TV cabinets, etc.). To protect the floor). If you buy a cloth bed, remind you to see if all the cloth can be taken off. Because I really can't stand the static electricity of chemical fiber, the next day I tried to take off the original cloth and make a set of pure cotton, but I found that the cloth cover was too long and was nailed into the bed box. Workers are lazy, thinking that I won't open condoms for a year or so. I don't know if anyone else has this experience. Anyway, the master came again the next day, and it was quite troublesome to dismantle the dead bed. Send home appliances quickly, and wait until money is tight or not in a hurry. Anyway, electrical appliances are more and more advanced and cheaper.

(18) Accessories are decorated, and the home has a taste. With decorative paintings and beautiful curtains, the gentle taste of home comes out. Remind you: don't spend too much money on the dressing of curtains. Curtain heads and lead pendants are necessary, but eight ten-dollar lace, cloth buttons and ears cost twenty or thirty dollars more per meter, which is unnecessary and ugly.

Second, the housing decoration matters needing attention

1, follow the cultural background

The decoration company will produce the decoration renderings, but we can't ignore the regional cultural background just because the renderings are good-looking, or put plush chairs in European-style houses because we want to combine Chinese and Western styles. This will not only have no fusion effect, but also conflict.

Step 2 think about it

After buying a house, everyone wants to move in as soon as possible, but they can't just find a decoration company and let them finish the decoration in a short time. There are bound to be many problems in such a hasty time. We need to spend some time choosing decoration companies and materials, so as to ensure the quality of decoration.

3, the level should be clear.

Everything has its priorities, and we should also pay attention to it in the decoration. For example, we can make the living room more complicated and the bedroom simpler.

Step 4 actively participate

As the owner of the house, we must actively participate in the decoration. If we don't participate, there will be many problems that can't be found and we may not be satisfied after construction.

5. Take the overall situation into consideration

Before decoration, you need to determine your own decoration style and the placement of various materials and furniture. Of course, the decoration budget should also be sufficient to avoid being in a hurry and overspending.

6, combined with the external environment

We need to pay attention to our surroundings. If there is noise around the house, simply decorate it, otherwise it will make people more annoyed, and sound insulation materials should be used when the walls are soft.

7, can't be monotonous

Although the single pattern is also good, it will be monotonous after a long time. After all, living in a new house takes a long time. In order to avoid it, although you can choose a single mode, I don't recommend you to choose a single mode. After all, we need to live in a new house for a long time. Being single and bored will make us lack energy.

The above is all the knowledge about how to decorate the house and the matters needing attention in house decoration. I believe you know something after reading this article. If you still want to know more knowledge, you can refer to this article, which can help you.

Test the luck of 20 18.