Manufacturing method of pig trough

The manufacturing method of the pig trough is as follows:

When making the pig trough, the skeleton is built with steel bars, and the template is fixed on the frame. Then pour the mixture of sand and cement into the formwork to make it evenly distributed. After the mixture is dried, the template in front of the pig trough should be scalded with boiling water to avoid breeding bacteria.

When making the pig trough, firstly design the skeleton with steel bars, then fix the formwork against the steel bar skeleton, then mix the cement and sand according to the ratio of 1:3, pour them into the fixed formwork, and shake the mould to make the cement evenly distributed. After the cement is completely dried, the mold can be removed and the pigging tank is completed.

Disinfection method of pig trough

After the pig trough is finished, it cannot be used immediately. Must be disinfected to avoid bacteria or germs in the tank, affecting the healthy growth of pigs. During disinfection, lime water should be poured into the pig tank. Soak for a day and then take it out, and then scald the pig trough with boiling water. Cleaning pig trough During use, the square pig trough should be cleaned once a week to prevent food residues from adhering to the trough surface and being eaten by pigs after mildew.

During the cleaning process, the pig trough should be brushed to remove impurities, and then put in a sunny place to dry. Matters needing attention in the use of pig trough In the process of use, pig trough should be placed in a pigsty with a large space, so as not to affect the activity space of pigs, and the pig trough is bulky and easy to break. The strength of the pig is so great that the pig trough is overturned.

Background art:

A pig trough is a container for feeding pigs. Traditional pig troughs are mostly stone troughs, which are very heavy and extremely inconvenient to move, but now pig troughs are mostly made of stainless steel.

It is convenient to move and clean, but the existing pig trough still has the following problems: the existing pig trough is generally placed inside the pigsty, which is not convenient to adjust the pig food in the pig trough, and it is easy to spill the pig food when adding the pig food. The existing pig trough is not convenient to control the flow direction of adding the pig food and is easy to add excessive pig food.

Technical realization elements

The utility model aims to provide a pig trough to solve the problems that the existing pig trough is generally placed in a pigsty, which is inconvenient to adjust pig food into the pig trough, and the pig food is easy to overflow when adding pig food, and the existing pig trough is inconvenient to control the flow of adding pig food, which is easy to cause excessive addition of pig food.