20 18 work plan for steel workers

The rebar worker refers to the person who uses tools and machinery to derust, straighten, connect, cut off, reshape and install the rebar skeleton. With the arrival of 20 18, how can a steel worker write a good work plan? The following is what I arranged for you: 20 18 steel workers' work plan. Welcome to refer to. More information is in the work plan column!

20 18 steel work plan (I) 20 17 has been passed. Looking back on the past year, with the guidance and care of the company leaders and the joint efforts of everyone, I have done the necessary work, but there are still many shortcomings. This year, I will carry forward the work style of "looking at the development and management of the company from the perspective of company managers", and carry out the work for 20 18 years in an all-round way based on the overall development plan and enterprise development direction of XX Administration Department and the guiding ideology of "more communication and more coordination". The work plan is formulated as follows:

First, ideological and moral aspects: strictly abide by the rules and regulations of the unit and complete every work in a down-to-earth manner. Be strict with yourself and always restrain yourself by "being a good worker". In addition, I also actively participate in all kinds of study and training, seriously participate in political study, and constantly improve my theoretical level and ideological and moral consciousness.

Work: A journey of a thousand miles begins with a single step. I am serious and responsible in everything I do, and I have never made a major mistake since I joined the work. The main job of the rebar worker is "doing". But to be a qualified steel worker, brute force and death alone are far from enough. It depends on "learning". The biggest difficulty encountered at first was that the theoretical level was not enough and I didn't understand the reinforcement drawing. Drawing is the key to construction, and reinforcement drawing is the core of construction. To this end, I made a rigorous study plan for myself. Work and study every day, and seize the opportunity to consult leaders, technicians and builders. After work, I will take notes on the difficulties I encountered in my day's work and the new knowledge and methods I learned, and often remind myself to improve myself. Day after day, year after year, now I can finally understand almost any painting. To be a qualified steel worker, it is not enough to know drawings. You must also know the performance of various steel bars, the general structure, installation and troubleshooting methods of various steel bar processing machinery, and a series of knowledge related to steel bars such as reinforced concrete, metal welding and building mechanics. Master the installation knowledge of complex steel structure and the structure, performance and processing knowledge of various anchors and fixtures. Master the basic knowledge of engineering construction management, and be able to calculate the replacement amount of various steel bars according to the requirements of specifications. Participate in the quality management group activities of this type of work and write general work experience and technical summary. Understanding of construction scheme of braided ordinary reinforced concrete project. Understand the application knowledge of new technologies, new equipment, new processes and new materials in this type of work. Organize the construction of various reinforcement projects to solve the technical problems of this type of work. Have the knowledge of formulating safety protection measures for this type of work and guide its implementation. Only in this way, continuous understanding and learning can make the processing and installation of steel bars in the process of building construction meet the requirements of design and specification, and ensure the quality and safety of the main building. Steelworkers should not only "learn" but also "think". Only through "thinking" can we improve the processing and installation methods of steel bars and make simple and easy-to-use steel bar molds. , in order to reduce the construction difficulty, improve efficiency and speed up the progress.

During the inclined shaft construction of Tianhuangping Pumped Storage Power Station tunnel, the leader of the project department appointed me as the monitor of the reinforcement class, responsible for the production and installation of the reinforcement in the inclined shaft. According to the drawing design, the inclined shaft tunnel is designed with 8 * 5.32m circular steel bars bound and overlapped with each other, and the site construction conditions and steel bar utilization rate are not fully considered. After full consideration, I put forward a new construction scheme to the project department, adopting the construction method of 6*6m+ 1*5.84m ring steel bars binding and overlapping each other. After research by the leaders, supervisors and design departments of the project department, it was unanimously decided to adopt my construction method. This design not only reduces the waste of steel raw materials, but also reduces the manpower and material resources needed to process steel bars, and accelerates the installation progress of steel bars, thus further accelerating the construction progress. Years of work practice have warned me to study hard, ask questions hard and practice hard. Never understand knives, from understanding to innovation, cultivate one's morality, be diligent in thinking and business study, integrate theory with practice, constantly update one's professional level and improve one's working ability. From accepting tasks, looking at drawings, constructing according to the process, keeping the site clean and tidy, and putting the equipment in order, such a workflow is gradually formed psychologically.

Looking back on the past and looking forward to the future has a long way to go. In the future work, I will constantly improve and improve my professional knowledge, professional technical level and cognitive ability. Actively study various norms, procedures and standards, and learn the application knowledge of new technologies and materials. High standards and strict requirements, and strive to be a "qualified enterprise employee". In the future work, I will cheer up my spirit, enhance my confidence, cherish every hard-won achievement, persevere, make myself move towards a farther goal in the steel processing industry and contribute to the construction of the motherland.

20 18 reinforcement work plan (2) has entered a new year in a blink of an eye. The new year is a year full of challenges and pressures, and it is also a very important year for me. I have been working for more than a year. Family life and work pressure drive me to work hard and study hard. Here, I have made this year's work plan, so as to sum up this year's experience and lessons in my future work, find better ways and make greater progress and achievements in the new year. The annual work plan is as follows:

1, further study the construction specifications and related professional knowledge, and gradually master the preparation of the construction plan.

2. Through study, I obtained the certificate of assistant engineer and tried to enter the 20 18 second-level constructor qualification examination, and obtained the second-level constructor qualification certificate.

3. Strengthen project management, and strengthen the ability of target control and management coordination.

I like my major and I love my post even more. Although I am young, with shallow work experience and limited construction experience, I will give full play to the advantages of young people, such as studious, diligent, hardworking and energetic. I will practice more in my future work, learn more new knowledge, make up for the above shortcomings, and strive to become an excellent technician and contribute my Weibo strength to the development of the company.

Generally speaking, all the tasks assigned by the leaders have been successfully completed. In more than one year of construction work, my professional knowledge and work skills have been deepened and improved, and my work ability (including organization and cooperation ability, management ability and contingency ability) has been greatly improved. More importantly, I have accumulated valuable work experience, and my achievements in one year have also been recognized by the leaders and colleagues of the project department. At the same time, thank you for your help and concern, and express my heartfelt thanks here!

The new year's bell is coming. Looking forward to 20 18, there will be more new challenges in the new year. I will go all out. In my future work, I will meet new challenges with a hundredfold enthusiasm. The successful capping of the * * public rental housing project is a good start for both individuals and the company where I work, the * * public rental housing project of ——Xi Anju Jianyi Company. I believe that under the correct guidance and cordial care of the project leader and the wise decision of the company leader, our project will be bigger and stronger. Finally, I wish the rental housing project a complete success, and I wish all colleagues and leaders a happy New Year! Good health! Have fun!

20 18 steel work plan (3) new year-2017 is coming in a blink of an eye. The new year should have a new atmosphere. While summing up the past, we should make plans for the new year so as to make greater progress and achievements in the new year.

Construction workers are the creators of material civilization, and socialist construction and development cannot be separated from the creative hard work of the vast number of construction workers. As a member of the construction industry, I can persist in studying theoretical knowledge and mastering operational skills at ordinary times, so as to achieve meticulous design, meticulous construction, long-term plans and quality first. I start from brick by brick, faithfully perform my duties and ensure the quality of the project.

"Do what you do, love what you do" I love my job. I treat the enterprise as a protagonist in my work, constantly spur myself with noble sentiments of professional ethics, give full play to the enthusiasm and creativity of my work, improve the efficiency of the enterprise, and be loyal to my duties are the main principles of professional ethics.

I usually abide by the rules and regulations and work safely. The fruits of construction workers' labor are a fashionable entity. In the construction process, we must follow certain procedures. Without rules, we can't be Fiona Fang. Every working procedure should have rules to follow, and we should also act according to the rules. With the development of production and fine division of labor, strict discipline and strict rules and regulations are especially needed. Therefore, we can consciously abide by it and demand ourselves as our own beliefs and professional discipline and morality.

In the usual work, respect teachers and love disciples, unite and help each other, and teachers preach, teach and solve doubts. Respecting teachers and loving disciples should establish a new relationship between them, create a harmonious and friendly atmosphere, and let them understand each other and complete their tasks in a sincere environment. Socialized mass production requires workers of different jobs and processes to care for each other, help each other and cooperate closely.

The upper and lower processes should cooperate with each other, leaving the difficulties to yourself and the convenience to others. As a teacher, we should not only have high political and ideological awareness and noble professional ethics, but also have rich production knowledge and skills. Before each construction, I can take the initiative to explain the various processes and technical points of the project to the workers, let everyone know the intention and practice of each job, and do a good job of passing, helping and leading. Young workers are a new force in the construction industry. They love learning and are good at accepting new things. Usually, I can learn new science and technology from young workers with an open mind, and combine my own technology and experience with new science and technology to make organic use of it. Care about the growth and progress of young people and become their mentor.

As a steel worker, on the one hand, we should work more, study more and study more to create more social wealth; On the other hand, it is the traditional virtue of workers to manage enterprises hard, make rational use of manpower, material resources and financial resources, make careful calculations, save expenses, reduce consumption, reduce costs, improve labor productivity, improve capital utilization, and be diligent and frugal. We should carry forward the fine tradition of thrift, which is a basic condition for enterprises to develop production and increase wealth for society. It also includes advocating respect for other people's labor and cherishing the fruits of labor, which is a moral requirement, and raw materials should be saved to the maximum extent. To save raw materials, we must be familiar with the process of the project, carefully study the materials used in each process, and have an overall understanding of the project, so as to reduce the waste of raw materials in the construction.

Today, with the rapid development of science and technology and the continuous improvement of productivity, science and technology are the main factors to promote the development of productivity. To improve the level of productivity, it is imperative to cultivate high-tech talents and learn science and technology. Therefore, diligent study of modern scientific and cultural knowledge and production skills has become one of the symbols of construction workers' ideals, ambitions and ambitions.

Learning and mastering modern scientific and cultural knowledge is not only a personal matter, but also a major event that directly affects modernization. Facts have proved that whether a worker studies technology seriously is not only very different in intelligence and wisdom, but also plays a great role in production and has a very different mental outlook. Therefore, the broad masses of workers should have a sense of ownership, take a long-term view, understand the necessity and urgency of learning new technologies, and study hard. It takes perseverance and hard work to learn modern scientific and cultural knowledge and production technology. Where there is a will, there is a way. Many skilled craftsmen in the construction industry are self-taught by perseverance, which sets an example for us. In order to meet the challenge, we must tap the potential from the connotation and expand reproduction. To do this, workers need to carry forward the virtues of diligent study and study hard, strive to be experts in technological innovation, and overcome one technical difficulty after another.

20 18 iron and steel work plan (iv) at the beginning of the new year, reviewing the work of the past year, under the guidance of the leaders of the Ministry of Security, and with the concerted efforts of colleagues Qi Xin, the iron and steel work has successfully completed various security, supervision and service work, actively completed various temporary tasks assigned by the leaders, and timely assisted the leaders to do a comprehensive job in the Ministry of Security, giving play to the leading role of the backbone. I am very interested in the future.

First, there are some problems in the overall deployment in the early stage, and there is a phenomenon of disrupting the battle. In order to achieve the goal of grabbing the construction period, the construction sequence did not go as planned. The overall layout of the website is not clear.

Second, there are some problems in the entry of raw materials. Because there are many workshops, materials may be needed by several workshops at the same time, and material distribution sometimes does not go as planned. Some workshops have more materials stored, resulting in a backlog, and some workshops have a shortage of materials, resulting in a large number of on-site transshipment. In view of this situation, it is suggested that similar projects can adopt centralized approach, centralized management and centralized processing of large quantities of similar semi-finished products in the future. The complex situation of raw materials entering the site is avoided, which is more conducive to the timely and reasonable utilization of tailings. The utilization rate of steel bars is improved, resources are saved, and the manufacturing cost of steel bars is greatly reduced.

Third, it is necessary to establish a dynamic management ledger for steel bar planning, which will be planned and arranged by a special person, and the raw materials and semi-finished products of the whole site will be rationally allocated.

Fourthly, as a professional system, the reinforcement system should be managed professionally as far as possible: overall planning, centralized sample calculation management, special quality management of reinforcement, and dynamic account cost management. At present, steel bar workers spend most of their time on ordinary on-site coordination management, but they have no energy to complete what their major should do, and they have not achieved real professional management. Reinforcement management is more like incidental management.

Fifth, the steel bar connection part should be included in the main structure contract as much as possible. At present, there is a lot of coordination work in the subcontracting of straight thread specialty, and there are many cooperation problems between different subcontractors, which leads to mutual blame and mutual shirking. There are many disharmonious factors, and even a deliberate dilemma has appeared under a tight schedule.

Thanks to the appreciation of the leaders, I have the honor to participate in the construction management of large-scale projects such as airport projects, especially those with large area and ultra-tight construction period. Let me know what speed it is to complete a project that everyone thinks is impossible.

Let the basically impossible things come true, and truly show that only unexpected things can't be done. Let me know how to plan and organize similar projects with large area and tight construction period in the future. I love my job, and I will further study professional knowledge and improve my professional skills. Although I have been engaged in this major for almost twenty years, I have never stopped studying, as if I was not only retreating when I was swimming in the water; In peacetime, the back waves of the Yangtze River push the front waves, and the back waves beat the front waves and beat the beach.

Looking forward to 20 18, I will go all out to give full play to my specialty. The related work of steel bar sampling, steel bar quantity calculation and quantity settlement can contribute to the interests of the project and the company. Only in this way can I live up to my major, my work and the care of my leaders.

I recommend it carefully.