What brand of machine tool is dmgmori?

Dmgmori is the integration of German Demaji and Mori Seiki Corporation of Japan, and the strong combination of German manufacturing (DMG 143) and Japanese manufacturing (Mori Seiki 65) has formed a new global leader of CNC machine tools-DMG Seiki.

Dmgmori's predecessor was three German machine tool manufacturers: Dacker, Mahao and Gitemai. Among them, Dacker is a well-known lathe brand, Mahao is a very well-known milling machine brand, and Gitemai produces both lathes and milling machines, and is also a company that is very good at marketing planning and promotion.

Gitemai Company was established in Germany 1870. Since 1949, Gitemai has been listed on the Stock Exchange. 1994, the company acquired Decool Dyke Company and MAHO AG Mahao Company. Since then, the famous "DMG" brand in the global machine tool industry has been born.

Extended data:

Conditions for use of CNC machine tools:

1, environmental requirements, the position of the machine tool should be far away from the vibration source, and the influence of direct sunlight and thermal radiation, humidity and airflow should be avoided. If there is a vibration source near the machine tool, an anti-vibration trench should be set around the machine tool. Otherwise, it will directly affect the machining accuracy and stability of the machine tool, and the electronic components will have poor contact and malfunction, which will affect the reliability of the machine tool.

2, power requirements, general CNC lathe installed in the machining workshop, not only the environmental temperature changes greatly, the use of poor conditions, but also a variety of mechanical and electrical equipment, resulting in large fluctuations in the power grid. Therefore, the installation position of CNC lathe requires strict control of power supply voltage.

3, temperature conditions, the environmental temperature of CNC lathe is lower than 30 degrees, and the relative temperature is lower than 80%. Generally speaking, there is an exhaust fan or air cooler in the numerical control cabinet to keep the working temperature of electronic components, especially the working temperature of the central processing unit is constant or the temperature difference changes little.

Demaji official website-Demaji enterprise profile