The simplest steps and processes of rough house decoration

The process of simple decoration may also hit a wall, so we should know something about the decoration of rough houses before decoration. Next, @ @ Bian Xiao will discuss the simplest steps and procedures to transform the roughing room. Interested friends can pay attention to it and hope to help everyone.

The simplest steps and procedures for the decoration of blank houses

The simplest steps and procedures for the decoration of blank houses

(a) tools in place, ready.

Before decorating, you must prepare something to put in your bag. Tape measure (buy 5 meters, not 3 meters), calculator, large plate clip (clip list, receipt); In addition, it is best to prepare old towels (soft cotton, ceramic tiles) and plastic bags (wrapped at the pipe joints to prevent dirt from blocking) at the construction site.

(2) Choose two auspicious days and start shooting.

Before the workers enter the site, it is best to measure all corners of the house and do it yourself. Write down the ruler and mark it clearly. Don't be lazy. The measurement contents mainly include:

1, the area involved in the decoration process. Especially in tile area, wall coating area, wallpaper area and building area;

2. Clear the size of the main wall. Especially it is necessary to design the wall size of furniture in the future.

(3) Remove the main body to make the space more practical.

The main body demolition is the first project, which mainly includes demolition, wall building, wall demolition, heating demolition, plastic steel windows and so on. After the demolition, the garbage should be cleaned in time to ensure the cleanliness of the room and facilitate the construction.

(4) hydropower transformation, arrange the use of each space.

Hydropower transformation, do not regret eating. The wall is brick and the ceiling is open, so it is difficult to add a socket. Therefore, be sure to determine the exact location of switches, lights, pools, bathtubs, washing machines, etc.

Before the hydropower transformation, the cabinet designer should go to the door to measure and help you determine the power and waterway transformation design.

For water heaters, it is best to send someone to design the position of power supply and interface according to the model you have determined.

Reminder: On the wall below the sink, it is best to leave a power socket to facilitate the installation of kitchen treasures.

Air conditioning holes and power supply should be placed on the bed wall as far as possible to prevent air conditioning from blowing people directly.

Keep a distance of 20 cm between strength and weakness. For example, there should be a distance of 20 cm between the socket and the network cable.

(5) Be sure to wrap the ugly tube.

Considering the humid environment of kitchen and bathroom, wooden keel must not be used as the material of riser! Everyone must be careful, even if the wooden keel is painted with antirust paint, it is not good.

Remember, bare keel or red brick. Light steel keel saves, but the most sturdy and easy to use is red brick.

(6) Tiling, that is, using physical texture before tiling.

Buy a floor drain.

Note: buy a special washing machine or shower with floor drain to deodorize.

After waterproofing is finished, you can stick tiles.

In addition to the normal attention to tiles, soak tiles in water and dry them in the shade; Broken tiles are left for cutting, emphasizing the overall beauty of tiles. Simply put, it is a brick on the wall, and its width cannot be less than 10 cm. This often happens when tiling bricks, such as wall width 1 m, brick 32 * 32cm, and the normal decoration method is 3 whole 1 small. But 32×3 = 96, the space of 1 cm should be reserved. Finally, the small brick can only be 3 cm wide. As long as you make it clear to the bricklayer in advance, the width of the upper wall brick should not be less than 10 cm. He can cut bricks on both sides. Or take a wall with a width of 1 m as an example, it will become 2 whole and 2 small. 32×2 = 64, joint 1 cm, small bricks with 17.5 cm on both sides. So it looks not only symmetrical on both sides, but also the whole wall will not be narrow.

However, this method is very expensive. Please buy wealth first, then buy bricks.

(7) Oilers beat, wash and brush.

If you don't buy a finished door, let the master do it.

Note: Any wood products, even just mouthwash, must follow this step. The core board sinks, faces, and then can be painted. When mixing oil, an irresponsible worker is lazy and brushes oil directly on the big core board. This is absolutely wrong. Remember, brush the oil directly, it won't take long, you must crack it all, remember to remember.

The method of painting is spraying or roller coating. Different people have different opinions. It is said that the spraying effect is better, but once it is damaged, the coating will become difficult.

(8) Wallpapers and beautiful walls

Sticker wallpaper is better than wall paint, and the effect is much better.

When painting the wall, the oil pipe will be painted to the place where wallpaper is needed. The paint can be dried every other day, and then the owner can paste the wallpaper. At first, I was worried that wallpaper would stain the white wall. After I released it, I knew it was a very clean job. It's a good thing to talk to master. If you pick up some places, you must help him repair them. .

(9) Install the socket panel

The socket panel can be installed for about half a day.

1, it is best to buy the switch function of the socket, especially in the kitchen. Such a rice cooker and microwave oven can be controlled without plugging or unplugging the power supply.

2. Although the socket with switch is good, we should pay attention to practicality. Five-hole power supply with switch, three sockets are flat. Once your appliance needs three rounds, there will be an empty socket. Therefore, even if there is no switch control, multi-functional sockets are necessary!

(10) The ceiling of kitchen and bathroom is sealed with the last ugly part.

First, install the water heater and Yuba. After installation, the ceiling can be better connected with the water heater on the ground, which is more beautiful.

note:

1, it is better to buy aluminum button ceiling, even if it is not used for many years, it is worthwhile to spend a lot of money to sell waste aluminum. On the other hand, pvc gusset plates look good, but the quality and performance are basically the same. Even if the waste is sold, the plastic is not worth much.

2, buy a pinch plate, ask the price of the whole package, do not pinch plate, buy it separately in the corner. But the installation fee is another matter.

(1 1) Install cabinets, and a beautiful integrated kitchen is born.

The cabinet is a supporting project, and the range hood, cooker and sink should be agreed in advance. It is best to deliver it on the same day and install it at the same time as the cabinet.

Cooperate with the cabinet factory in advance to cut the position of the stove and sink together with the artificial stone countertop.

(12) Installation of finished door

The finished door should be installed in front of the floor, mainly because the steps of the door are complicated, such as hinge, door lock, door stop, door frame and so on. There are many tools used, such as installing the floor first, so it is difficult to avoid bumping.

(13) Install drying racks, curtain rods, lamps, sanitary wares and bathroom hardware.

It is suggested to fix these ashes before installing the floor.

(14) Installing the floor

Before installing the floor, you must level it, prepare a little pepper in advance, and don't buy the so-called insecticidal powder brought by the floor workers, so you can sprinkle it on the upper corner of the floor. Workers don't need to cut the floor in the house, cut in the corridor and finally clean the corridor.

(15) Installing radiator

Decoration is the most easily overlooked in the end.

Be sure to make it clear to js in advance If the installation of the single cover is not the manufacturer's seal, it will not be signed.

Pay attention to the installation list of radiator (not the purchase order), and the manufacturer's seal is the cover of the purchase order; The seal of the installation team is the seal of the installation single cover. In this way, the so-called "protection for ×× years" is only the radiator itself, and the material is not steel or copper and aluminum. As long as it can be delivered, there is almost no quality problem. The most error-prone place is installation! If you agree to wear the team seal, it basically means that you give up the right to pursue the responsibility of the manufacturer. Once the accident has soaked the floor and flooded the house, the manufacturer is absolutely irresponsible and the installation team can't find the right person. The so-called warranty can only be borne by the user himself.

(16) Debris Cleaning

The biggest manifestation of cleanliness is cleaning the glass. It is a terrible thing to climb the stairs and clean them. Secondly, floor waxing is cheaper if you buy your own wax, but you must use a clean waxing machine, which is dozens or hundreds of times faster than manual waxing.

The rest of the road, I don't think we need to rely too much on cleaning. They also scrape there with small blades, which is not so energetic.

Therefore, after cleaning, it is best to carry out detailed cleaning. Go to the supermarket to buy a pack of "Wujie powder" and some old towels. Use an old towel, dry it with five clean flour, from mouthwash to door, from tile to kicking corner, clean a room and a house, don't be lazy. The result will surely make you proud.

(17) Furniture and household appliances enter the market.

A new home, the first new home, furniture bears the brunt. Bed, mattress, wardrobe, shoe cabinet, sofa, dining table, etc.

Reminder: Prepare the following items before entering the venue: disposable shoe covers (don't buy inferior ones, you can rest when stepping on them), several boxes of activated carbon, ladders, floor protective film (carrying wardrobe, TV cabinet, etc.). Protect the floor).

(18) Accessories and decorations make the family have taste.

Decorated with decorative paintings, coupled with beautiful curtains, a gentle taste of home comes out.

Reminder: Don't spend too much money on dressing up. Curtains and water pipes must be added, but shoelaces, buttons and tassels are all eight yuan, ten yuan and so on per meter. It costs twenty or thirty dollars, which is unnecessary and ugly.

The simplest steps and processes of rough house decoration

What's wrong with the decoration? Do you know that?/You know what? Do you know that?/You know what? I believe that with this, you can easily decorate your house. The above is the simplest part of the renovation process and flow of rough houses. Bian Xiao hopes that everyone can solve the decoration problem as soon as possible. If you have any other decoration problems, please feel free to pay attention to Tuba Rabbit.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~