How to solve the air leakage of air pump solenoid valve?

The air compressor has been running for a long time. Because of the high temperature, the solenoid valve coil inside is burnt out or the wire is broken, and the air compressor will leak. If this is a fault, it can be replaced with a new solenoid valve.

Generally speaking, the air leakage of air compressor is mostly related to the solenoid valve coil, but it is necessary to check whether it is the one-way valve or the largest copper screw on the one-way valve. If it is a one-way valve, you can remove the largest screw on the one-way valve, directly find the spring and silicone pad inside, gently lengthen the spring, and then reinstall it according to the original parts.

Extended data:

Precautions:

Be careful when using the valve on the same outlet base, because the cylinder will fail because of the pressure recovery. Especially when using pneumatic valve or single-acting cylinder or using 3-position neutral valve to release the valve, because the deflation of other cylinders may lead to failure. If there is danger of being affected by the recovery pressure, choose 1 slide the pressure relief valve or use the supply/export block fittings to take countermeasures.

When the three-position neutral stop valve is used to prevent the cylinder piston from stopping at the middle position, it cannot stop at a certain position accurately because of the compressibility of air. In addition, because the valve and cylinder are not sure that they will not leak, they may not stop during the extended period. If you want to extend your stay, please contact Changtuo.

Baidu encyclopedia-electromagnetism valve