How to clean the carbon deposit of throttle sensor

At this time, the removed throttle can be cleaned. Put professional throttle cleaning products together to avoid leaving stains. However, in order to protect people's health and safety, please wear masks, gloves and glasses. On the other hand, non-disassembly cleaning means that the throttle cleaner is directly sprayed on the cloth to scrub the throttle. Because there is no need to disassemble the throttle assembly in the whole process, the operation is relatively simple and time-saving. However, this method has a general cleaning effect, especially suitable for throttle valves without stains. When there are many stains on the throttle, it is best to remove them and clean them. The cleaning method of carbon deposit on the throttle sensor is as follows: firstly, remove the intake throat, expose the throttle valve, remove the negative electrode of the battery, turn off the ignition switch, then turn the throttle valve over and straighten it, spray a small amount of cleaning agent on the inside, and carefully scrub it with polyester rag or high-spinning "non-woven fabric". For places that can't be reached inside the throttle, wipe them carefully with a rag. After cleaning, reinstall and start the throttle initialization according to the removal steps. After cleaning the throttle, be sure to initialize it, because the computer will remember to adjust the throttle opening. When the sludge is blocked, the computer will automatically adjust the throttle opening to ensure normal air intake. After cleaning, if the sludge is no longer blocked, the throttle will keep the original opening, and the intake air is too large, and the engine may shake or not accelerate when starting, and the engine fault indicator light may light up at this time.