How to pull out the inlet elbow of Excelle throttle?

But you have to ask someone else first, otherwise it will be easy to make mistakes and you will have to spend money on it in the end.

Turn off the ignition switch first, otherwise it will produce a fault code if it is pulled out. Maybe you should turn on the fault light, unplug the air inlet hose (it should be the temperature sensor), loosen the hoops on both sides, and then pull the hose down. The middle pipe is an oil steam pipe, so you don't need to pull it out. Then you can wash it, but this is a cable throttle with an idle valve, and there are many things to disassemble. I suggest you wipe the throttle.