Where is the Wuling Hong Guang sensor?

The installation positions of the main sensors of Wuling Hong Guang are as follows: 1. Oxygen sensor: installed on the exhaust pipe, it monitors the burnt gas and judges whether the engine is fully burned and whether the mixing degree is too thin or too rich. 2. Wheel speed sensor: it is mainly used to collect the rotating speed of the car and judge whether the car slips. Usually installed on the hub of each wheel. Once the sensor is damaged, ABS will fail. 3. Water temperature sensor: installed beside the thermostat, it converts the temperature of cooling water into an electrical signal, increases the fuel injection amount or ignition advance angle at low temperature, prevents explosion at high temperature, and delays the ignition advance angle. 4. Intake pressure sensor: generally installed on the throttle valve, it senses a series of resistance and pressure changes with different engine speed and load, and converts them into voltage signals for ECU to correct fuel injection quantity and ignition timing angle.