Removal of solenoid valve of Chery a3 intake camshaft

Loosen the screws at two places with a flat-head screwdriver and remove them.

The screw at the inlet end is loose enough to be pulled out. The second position is on the lower right. After loosening the bayonet on the accelerator, pull the degumming pipe with a little force, and then lift the square box and take it off (there are two locating plugs on the windshield side under the box, which can be easily taken off with a little skill). Plastic cover of the engine: First, unscrew the cover of the oil filler and break it at four corners with a little force. There are three locating pins under the cover. If the rubber seat is covered, use a little force. Then pull out the plug with pliers, clamp it on the top and pull it out by hand on the bottom.

This is a part of the piston engine. Its function is to control the opening and closing of the valve.