How to clean Mazda cx4 throttle valve and how to clean Mazda cx4 throttle valve.

How to clean Mazda cx4 throttle valve? How to clean Mazda cx4 throttle: First, you need to remove the plastic heat shield from the engine. With the hood removed, you can see the throttle. There are some empty gas pipelines around the throttle valve, which need to be removed, and the position of each pipeline should be recorded clearly. After the air pipe on the throttle is removed, we can remove the whole throttle. Trent's throttle is fixed on the engine block with four bolts, and we can quickly remove it with suitable tools. The side of the throttle near the combustion chamber is usually dirty, and the black carbon trace is the main part that needs cleaning. Cleaning the throttle is mainly to remove carbon deposits on it. We can use special throttling cleaning liquid or detergent. It should be noted here that the cleaning principle of this cleaning agent is to dissolve carbon deposit, and its composition is harmful to human body. It is best to wear gloves and masks when cleaning. Spray the cleaning agent to the position with more carbon deposits on the throttle, and wait for the carbon deposits to dissolve for about 5- 10 minutes. Brushes can speed up the removal of carbon deposits. When we see that the stain on the accelerator has completely dissolved, we can wipe the detergent inside the accelerator with a clean towel. Install the cleaned throttle valve on the engine block according to the original position, and then install all the air pipes to complete the whole process of cleaning the throttle valve. After all hardware is installed, throttle needs to be initialized.