Can't the fiber laser cutting machine cut through after air leakage?

Sometimes it is not only the problem of insufficient air flow, but also other problems. It is suggested that the manufacturer debug or find out the problem.

There may be the following reasons why the workpiece of fiber laser cutting machine cannot be cut through:

1. Insufficient laser power: the workpiece cannot be completely cut due to insufficient laser power. In this case, it is necessary to increase the laser power to ensure the cutting quality.

2. Too fast cutting speed: If the cutting speed is too fast, it may lead to incomplete cutting. In this case, it is necessary to slow down the cutting speed to ensure the cutting quality.

3. Insufficient airflow: If the airflow is insufficient, the molten material cannot be discharged from the cutting opening, resulting in incomplete cutting. In this case, it is necessary to increase the gas flow to ensure the cutting quality.

4. Wear of cutting head parts: If the cutting head parts are worn, the cutting may be incomplete. In this case, the worn parts need to be replaced to ensure the cutting quality.

5. The workpiece material is too thick: If the workpiece material is too thick, it may lead to incomplete cutting. In this case, it is necessary to select appropriate cutting parameters to ensure the cutting quality.

In a word, it is necessary to find out the specific reasons for the problem that the workpiece of the fiber laser cutting machine cannot be cut through, and take corresponding measures to adjust and repair it to ensure the cutting quality.