How to Clean Honda Lingpai Throttle

The method of cleaning the accelerator by Honda Lingpai: Step 1: Prepare tools. 10 small wrench (remove the battery terminal), large Phillips screwdriver (remove the air inlet elbow), T30 internal wrench (remove the throttle), and a bottle of carburetor cleaner. Step 2: Remove the throttle inlet elbow. Step 3: Unplug the throttle harness plug. Step 4: Remove the throttle body. Automobile throttle function: control the air intake, and the oil quantity can be automatically controlled by the throttle position sensor. In other words, it is a device that controls the throttle.

Honda Lingpai Throttle Maintenance: Failure to clean the throttle for a long time will cause the throttle opening to be wrong, and air with impurities will enter the engine combustion chamber. These two results will lead to abnormal engine operation, mainly including unstable idle speed, sudden feeling of turning off the throttle when driving, reduced power, even difficult starting and increased fuel consumption. Effectively remove the carbon deposit and colloid attached to the combustion chamber, throttle valve and intake manifold, and make the oil-gas mixing ratio return to normal. Improve combustion, reduce fuel consumption, increase effective engine power and stabilize idle speed. Harmless to sensors and three-way catalysts, and non-corrosive to metal and rubber products. An effective protective film is produced on the inner wall of the air intake system to ensure the normal operation of all components and reduce fuel consumption.

Cleaning method of fuel injector: 1. Add Sinopec oil several times from time to time, which already contains trace cleaning agent. 2. Add ethanol gasoline from time to time, and the surfactant inside can dissolve the nozzle gel well. 3. The repair shop fills the bottle, and the cleaning agent enters the manifold through the throttle valve to dissolve the outer glue of the injector. 4. The repair shop removes the fuel injector for cleaning (usually unnecessary).