Video tutorial on gas stove disassembly

The gas stove disassembly tutorial is introduced as follows:

1. First, close the natural gas valve of the gas stove.

2. Then remove the bracket on the gas stove.

3. Next, pull out the fire cover on the gas stove.

4. Then take out the base of the gas stove upwards.

5. Finally, the gas stove was dismantled.

What are the precautions when using gas stoves?

# 1 Before use

1. First of all, we should prevent the danger from happening at the root. When buying a gas stove, buy a gas stove with an automatic flameout protection device.

2. Gas stoves should be installed and debugged by professionals. Clean the air inlet of the cooker, check whether the rubber hose leaks, and then connect it. After installation, turn the button to see if the flame is light blue. If the flame turns yellow or backfires, it is necessary to adjust the size of the air inlet.

3. After installation, read the instructions first, understand the correct use of the gas stove, and use the gas stove as required.

#2 When in use

1. When cooking with a gas stove, someone should be around to adjust the size of the flame according to actual needs. If no one is watching, the water will overflow or the wind will blow out the flame. If the flameout protection needle does not work in time at this time, it is easy to leak. In case of air leakage, turn off the air source in time and open the doors and windows for ventilation to avoid gas poisoning.

2. If the gas stove turns off for no reason during use, stop cooking immediately, turn off the gas source, first open the doors and windows to see if there is gas smell, and check the cause of the flameout. If you can't find it, you should call the after-sales phone in time and continue to use it after solving the problem.

3. When cooking, open the windows of the range hood and kitchen to ensure smooth air. After cooking, we should form the good habit of turning off the gas source valve at will to prevent gas leakage.

#3 Regular inspection

1. Because gas stoves usually use rubber hoses to connect pipes, we should always check whether the rubber hoses are aging or worn. We must replace the rubber hose every other year or at most one and a half years, and the length of the rubber hose should not exceed 2 meters. It is best to replace the metal hose in time.

Simple inspection method: apply soap liquid to the hose to see if there are bubbles. If there is air bubble, it means there is air leakage, so it should be replaced in time.

2. After the gas stove is used for a period of time, it should be cleaned, because the dirt generated at ordinary times will block the fire hole, causing tempering and damaging the gas stove.

3. If there is no one at home on a long-term business trip, turn off the main valve of gas meter or liquefied gas valve.