How to Solve Magotan Throttle Blockage

1, clean the throttle first. The throttle is seriously carbon-deposited, which will cause the throttle to jam. You need to go to the 4s shop to clean the throttle. Replace the throttle valve and check whether the throttle plate is worn. If the throttle valve is damaged, it needs to be replaced with a new one.

2. Secondly, replace the position sensor. Throttle jam may be due to the wear of the internal contact of the throttle position sensor, which needs to be replaced. If the throttle position sensor is integrated with the throttle, the throttle assembly needs to be replaced. If the throttle opening screw is screwed too tightly, the throttle will get stuck, so it is necessary to loosen the throttle opening screw with a screwdriver.

3. Finally, add oil. Throttle jam may be due to insufficient lubrication of internal parts, so it is necessary to add some oil to throttle spring and internal parts. The valve is stuck and moving badly, and the engine speed can't be controlled. It is necessary to replace the throttle valve and the connected water pipe to eliminate the fault.