How to clean Chang 'an cs75 throttle

Changan cs75 accelerator has no clear cleaning cycle time, and car buyers can also judge whether to clean it according to the condition of the car.

If there is too much grease on the accelerator, it is likely that the engine will not accelerate in place and the fuel consumption will increase, which is a great distress for riders. What should I do if the throttle is dirty? As long as you clean it, you can get it quickly by going to the 4S shop, but don't you need to go to the 4S shop every time you clean it? Actually, you don't need it. You can win by yourself. Don't forget to initialize.

When cleaning the throttle valve, first apply a little oil on the fixed metal beam ring to prevent the teeth from slipping when disassembling. [1] Remove the metal collar of the plastic hose of the throttle valve. After removing the plastic hose, the left side is the part of the throttle. In the stage of removing the negative electrode of the battery, turn off the starting motor, straighten the hook of the throttle plate, spray a small amount of "carburetor cleaner" into the throttle, and then carefully clean it with a polyester cloth towel or a high-count "unprotected cloth". The deepest part of the throttle valve can be carefully cleaned with the iron clip on the towel.

When cleaning the throttle valve, it is not necessary to disassemble it, but the sealing position of the inlet steam must be cleaned, and the idling motor must be disassembled and cleaned. Borrowing and disassembling syringes have their own advantages and disadvantages. Generally speaking, the maintenance center proposes disassembly in order to avoid other unnecessary consumption, such as replacing gaskets or installing some other gaskets after disassembly, or delaying the buyer's time due to oil leakage during the whole disassembly process.

After cleaning, according to the disassembly procedure just now, the throttle valve needs to be initialized gradually after installation. After cleaning the throttle, initialization is required. Because the throttle opening is adjusted on the computer, it has a memory function. Because of the blockage of oil pollution in the past, in order to better ensure air intake and gas supply, the computer will automatically adjust the throttle opening to keep the air intake in normal conditions.