Adjustment after replacing 0 1 Prima throttle position sensor

What is the adjustment method of 0 1 Prima throttle position sensor after replacement? The method is as follows:

1. Remove the old throttle position sensor, install the new sensor in the original position, and fix the screws.

2. Unplug the battery positive pole of the vehicle to prevent short circuit caused by misoperation.

3. Connect the diagnostic instrument, turn on the vehicle power supply and enter the "learning mode" (also called "adaptive learning").

4. In the menu of the diagnostic instrument, select "TPS Learning”(TPS is the abbreviation of throttle position sensor) and follow the prompts.

5. According to the prompt of the diagnostic instrument, gradually turn the accelerator pedal from fully closed to fully open, and observe whether the accelerator opening indication on the instrument panel is normal.

6. When the diagnostic instrument displays "Learning Complete", it means that the adjustment of the throttle position sensor has been completed. You can turn off the power supply, unplug the diagnostic instrument and reconnect the positive battery.