How to make lanterns?

The manufacturing method of lanterns is as follows: firstly, cut the red a4 paper from the middle, fold it in half up and down to about 1cm, and stick double-sided tape on the folded place.

In addition, there are:

Step 1, and then draw on the red paper every 5mm with a knife. The more accurate the drawing, the better. Set aside.

Step 2: Then cut the yellow paper into a rectangle with a width of 1 1cm, stick double-sided tape on one side of the rectangle and roll it into a tube.

Step 3, tear off the double-sided adhesive tape on the red paper, align the edge of the red paper with the cylinder, and stick the double-sided adhesive tape on the upper and lower sides of the cylinder.

Step 4: Next, cut the remaining red paper into a 5cm rectangle, fold it at the top of 1cm, stick double-sided tape on it, and cut off the lantern ears.

Step 5, immediately roll the lantern ear on the rope, make the top and bottom of the lantern with two 6cm yellow squares, and pass the finished lantern ear through the bottom of the lantern.

Step 6: Finally, put on the lantern, glue the bottom of the lantern, then pass through the top of the lantern and glue the top.

The second method is as follows:

1. Fold the selected rectangular colored paper in half horizontally, and then leave a distance of about 0.8- 1cm at the opening. Draw a line with a ruler and pencil as a dividing line to avoid untidy scissors. Then cut it with scissors every 0.2-0.3cm.

2. After cutting, open the paper and smooth it, then connect it end to end, and add the handle to make a lantern. Children who like tassels can also make tassels of the same length and stick them on the bottom of lanterns.