How to match the tiggo 8 throttle

Pacific Auto Network 1, turn the key to the power gear first, and never start the car, that is, the engine is turned off. 2. After standing for about 15 seconds, quickly step on the accelerator pedal to the end, be sure to step on it quickly, hold on for 15 seconds, and then quickly lift the pedal. 3. Then close the key door, take out the key and let it stand for about 15 seconds. 4. Start the car normally and complete the matching.

It should be noted that the above method is a manual matching method for most electronic throttle vehicles, which is basically universal. The reason is that the adaptive learning function of the computer is used. A disappointment can be repeated several times.

Electronic throttle Electronic throttle is an important control part of automobile engine. It is composed of engine, speed sensor and throttle valve. The electronic throttle control system can accurately control the throttle opening.

The basic structure of the electronic throttle system consists of the following parts:

1, engine.

2. Speed sensor.

3. Throttle position sensor.

4. Throttle actuator.

5. Throttle.

6. Accelerator pedal position sensor.

7. Speed sensor.

8. transmission.

9. accelerator pedal.

10, throttle electronic control unit (ECU).

How to detect the quality of electronic throttle? The general steps are as follows:

1, first of all, whether it is stable from the idle speed;

2, then, neutral boom accelerator boom to 4000 rpm, loosen the accelerator pedal, to see whether the throttle back smoothly;

3. Finally, check whether there is any fault code, and clean the throttle valve, fuel injector and intake branch pipe when driving normally for 4wkm.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)