How to save energy by floor heating

First, avoid frequent switching of floor heating; People don't need to turn off the floor heating when they leave the house for a short time, because it takes more energy to turn it on when they come back. Secondly, the temperature setting should be appropriate; It is generally recommended to set it to about 18 degrees. For every degree of increase, energy consumption increases by 5%. In addition, floor heating control in different rooms, installation of indoor thermostat and regular cleaning and maintenance can also save energy and gas.

1 to avoid frequent switching. When people leave the house for a short time, they don't need to turn off the floor heating, because they need more energy to turn it on when they come back. Frequent switching not only fails to achieve the energy-saving effect of the floor heating system, but also increases the operating cost of the heating system. At the same time, frequent switching of heating system will also reduce the service life of floor heating system.

2. If the temperature setting is very important, it is generally recommended to set it around 18 degrees. For every degree of increase, energy consumption increases by 5%. The water temperature of floor heating water supply is only about 40℃ and cannot exceed 60℃.

3, start the floor heating can not suddenly heat up, whether it is the first time to use or have been used for a period of time, when starting the floor heating system, the system temperature can not be set too high. When the indoor temperature is low, suddenly increasing the temperature of the floor heating system will not only damage the components of the floor heating system, but also affect the service life of the floor heating system and may lead to floor deformation.

4. The control room that is not commonly used in the floor heating sub-room can reduce the temperature by several degrees. If a room is uninhabited for a long time, you can even turn off the floor heating in that room, which can save natural gas. When you leave the house for a long time, you only need to lower the temperature of the thermostat by a few degrees. However, it should be noted that if there is equipment or pipeline in the room that is afraid of freezing damage, it should be turned on to a certain temperature to prevent the equipment or pipeline from freezing and cracking.