Chuanqi gs4 throttle

How to reset the accelerator of Chuanqi gs4?

To reset the throttle valve of Chuang 4, you need to go to 4S shop or other repair shop. Throttle is a controllable valve that controls air to enter the engine. There are two kinds of throttle: traditional cable throttle and electronic throttle. The traditional engine throttle control mechanism works through a cable or a pull rod, one end of which is connected with the accelerator pedal and the other end is connected with the accelerator linkage plate. The electronic throttle mainly uses the throttle position sensor to control the opening angle of the throttle according to the energy required by the engine, so as to adjust the intake air. It is the most important part of the throttle EFI engine system. Its upper part is the air filter, and the lower part is the engine body, which is the throat of the automobile engine. Whether the acceleration of a car is flexible is closely related to the cleanliness of the throttle. When cleaning the throttle valve, it is not necessary to disassemble it, but it is necessary to clean the sealing part of the inlet steam. Idling motor must be removed before cleaning. Nozzle borrowing and cleaning and not disassembling have their own advantages and disadvantages. Generally speaking, the maintenance station suggests not to open it for cleaning to prevent other unnecessary waste. After cleaning the throttle valve, it should be initialized according to the disassembly procedure. After the throttle valve is installed, it needs to be initialized, because the computer has a memory function when adjusting the throttle valve opening, because there was sludge blockage in the past. In order to ensure the air intake, the computer will automatically adjust the throttle opening to keep the air intake in a normal state.