What's the matter that BMW 5 Series can't get full transmission?

1, too little warm-up time for the cold car; 2. Serious carbon deposition in the oil circuit; 3. Insufficient oil; 4. Poor oil quality; 5, throttle, nozzle failure; 6, gearbox program problems; 7. The fuel pump is damaged; 8, ignition coil, spark plug failure; 9.vanos solenoid valve is dirty or faulty.

The reason why BMW 5 Series can't get full transmission is:

1, too little warm-up time for the cold car;

2. Serious carbon deposition in the oil circuit;

3. Insufficient oil;

4, the oil is not good;

5, throttle, nozzle failure;

6, gearbox program problems;

7. The fuel pump is damaged;

8, ignition coil, spark plug failure;

9.vanos solenoid valve is dirty or faulty. The length, width and height of BMW 5 Series are 5 106mm, 1868mm and 1500mm respectively, and the wheelbase is 3105 mm. It is equipped with an 8-speed automatic manual transmission with a top speed of 230 kilometers per hour.

BMW's engine is equipped with variable valve lift and variable valve timing system. If there is a problem with these two systems, the engine may not be able to output all the power, which will cause the transmission system to be unable to obtain all the transmission power. This fault code indicates that the engine cannot output all power.

Three-way catalytic blockage will also affect the engine's failure to output all power, and the wrong ignition timing and ignition advance angle will also affect this problem. So after this problem occurs, you need to go to the 4s shop to read the fault code with a special diagnostic computer, then find out the cause and location of the problem and replace the faulty parts.

(Photo/Text/Photo: The Beast in Question) Ask the world M5 Chuanqi GS8 AION V Macchiato DHT PHEV Latte DHT Gaohe HIX @ 20 19