Where is the Volkswagen LaVida sensor installed?

The installation position varies depending on the function of the sensor. The position of Volkswagen LaVida sensor is as follows: 1. Oxygen sensor: The oxygen sensor is installed on the exhaust pipe to monitor the combusted gas and judge whether the engine is fully burned and whether the mixing degree is too thin or too rich. 2. Wheel speed sensor: Generally, the wheel speed sensor is located on the front wheel brake disc, so there is a sensor to collect the wheel speed of the car for this operation. Generally installed on the hub of each wheel, but ABS is invalid when the sensor is damaged. 3. Water temperature sensor: installed next to the thermostat like a water temperature sensor, which converts the temperature of cooling water into an electrical signal, increases the fuel injection amount or increases the ignition advance angle at low temperature, prevents explosion at high temperature and delays the ignition advance angle; 4. Intake pressure sensor: generally installed at the edge of the throttle. As the name implies, the intake pressure sensor senses a series of resistance and pressure changes according to different engine speed loads, and converts them into voltage signals for ECU to correct fuel injection quantity and ignition timing angle. Failure will cause problems such as difficult ignition, unstable idle speed and weak acceleration.