Traditional Culture Encyclopedia - The 24 Solar Terms - What is the throttle matching method of Wuling Glory?

What is the throttle matching method of Wuling Glory?

The matching method of Wuling Glory throttle in Pacific Auto Network is: 1. Turn the key to the power gear and do not start it; 2. Let it stand for about 10 second, quickly step on the accelerator pedal to the bottom, hold it for 15 second, and then quickly lift the pedal; 3. Close the key door, remove the key and let it stand for about 15 seconds; 4. Start the car normally. Matching is complete.

Because the car computer has a memory function, it has adapted to the state before the throttle is cleaned. After cleaning, the throttle opening changes, which will be directly reflected in the computer. The common phenomena are high idle speed and low idle speed or high idle speed, so it is recommended to use a detection computer for matching. If the throttle valve does not match after cleaning, it may cause problems such as increased fuel consumption.

Correct matching method of throttle:

1, the diagnostic instrument matches. After changing the throttle, you can use the special diagnostic instrument for automobiles to match. After entering the system, select the action test and click the adaptive value reset to zero. Do this several times in a row, and the vehicle starts, indicating that the matching is successful.

2. Power-off matching: After changing the throttle, disconnect the negative electrode of the battery and wait for one minute before installation. In this process, the original memory of the on-board computer will be erased, the factory settings will be restored, and the vehicle will start to run normally and the matching will be successful. This method is only suitable for low-grade cars, not high-grade cars.

3. Throttle is a controllable valve to control air to enter the engine. After the air enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, which will be successfully formed after combustion. It connects the air filter and the engine block, and is called the throat of the automobile engine.

(Photo/Text/Photo: Pacific Auto Network Li Shuiqing)