/kloc-how to clean the throttle of 0/3 yinglang?

Pacific Auto Network sprays the cleaner to the position with more carbon deposits on the accelerator and waits for it to dissolve the carbon deposits for about 5- 10 minutes. Using brushes can speed up the removal of carbon deposits. After the stains on the throttle are completely dissolved, you can clean the detergent inside the throttle with a clean towel. Install the cleaned throttle valve on the machine body according to the original position. Then install all the air pipes to complete the whole process of cleaning the throttle.

There are the following steps:

1, remove the hood and you can see the throttle. There are some air pipes around the throttle, which need to be removed, and the position of each pipe should be clearly recorded.

2. After removing the air pipeline on the throttle, you can remove the whole throttle.

3. The side of the throttle near the combustion chamber is generally dirty, and the black carbon deposit marks are the main parts that need to be cleaned.

4. Cleaning the throttle is mainly to remove carbon deposits on it, and special throttle cleaning liquid or cleaner can be used. It should be noted that the cleaning principle of this cleaning agent is to dissolve carbon deposit, and its composition is harmful to human body. It is best to wear gloves and masks when cleaning.

5. Spray the cleaner to the position with more carbon deposits on the throttle, and wait for about 5- 10 minutes to dissolve the carbon deposits. Using brushes can speed up the removal of carbon deposits.

6. After the stains on the throttle are completely dissolved, we can clean the detergent inside the throttle with a clean towel.

7. Install the cleaned throttle valve on the machine body according to its original position. Then install all the air pipes to complete the whole process of cleaning the throttle. After installing all hardware, initialize the throttle.