150 how to connect the bypass valve on the throttle assembly of EFI motorcycle?

1. First, fix the four screws of the accelerator. You can screw it by hand first, because the hand is sensitive, so avoid screwing the screw directly with the sleeve.

2. After manual tightening, you can tighten it with tools, and then plug it in. It takes a little effort to install the plug. Only a click means that the throttle is fixed.

3. Then install the hose. There are two grooves on both sides of the hose. Don't aim at the convex grooves on both sides. Both ends of the hose are completely sleeved until the two convex and concave parts are completely kissed.

4. Touch the bottom of the hose by hand to ensure that the lower part is completely inserted, tighten the screws on the iron hoop, install the engine cover plate and install the throttle valve.