Throttle cover falls off

1. Insert a screwdriver into the gap of the intake pipe buckle and pry out the buckle to the limit point B. ..

2. Pull out the intake pipe and cover the throttle valve with something to prevent dust. Pull the buckle out of the intake pipe, and pay attention to avoid the plastic parts on the buckle falling off.

3. Stick the metal buckle with 502 glue and let it dry for a few minutes. Wipe the inner and outer walls of the throttle and intake pipe with a clean rag.

4. Insert the reinforced buckle back to point B of the intake pipe, then tighten the throttle valve of the intake pipe, and finally push the buckle completely to point A to finish the work.