How to match the throttle of Guangqi Honda Lingpai

The matching method can be completed by a special computer or manually. Turn on the second gear of the key, that is, the gear where the indicator light is all on. Then wait for 20 seconds, press the accelerator to the bottom, hold it for about 10 second, release the accelerator, turn off the ignition switch, and pull out the key, and the matching is complete.

Another method is to turn on the key for 30 seconds, then turn off the ignition and pull out the key. It should be noted that after these two methods are completed, it will take some time to try to ignite. Generally, you can wait for 15-20 seconds, then ignite to see if the refueling is normal, and the engine fault light goes out. If at first you don't succeed, you can do it again until you succeed. You can usually succeed once, at most twice.

According to different cars, the matching methods are different. Some cars must be initialized by a computer. If so, it is recommended that the owner send the car to a shop with professional equipment for matching.

Throttle is a controllable valve to control the air entering the engine. After the gas enters the intake pipe, it will mix with gasoline to form a combustible mixture, thus forming combustion work. Throttle is one of the most important components in EFI automobile engine system. The upper part of the throttle valve is the air filter grille, and the lower part is the engine body, which is the throat of the automobile engine. Whether a car accelerates flexibly has a lot to do with the dirt on the accelerator. Cleaning the throttle can reduce fuel consumption and make the engine flexible and powerful.

Million car purchase subsidy